Installation Guide

ManualsBrandsLa Crosse Technology ManualsGarden CenterDigital Wireless Atomic Clock with Moon Phase

ATOMIC DIGITAL WALL CLOCK

with Moon Phase and Indoor/Outdoor Temp

QUICK START GUIDE

Model: WS-8418U-IT

DC:051418

Full Manual can be found under the Support Tab here: http://bit.ly/WS-8418U

ATOMIC DIGITAL WALL CLOCK OVERVIEW POWER UP

1. Insert 2-AA batteries into the outdoor sensor.

2. Insert 2-AA batteries into the clock.

3. Conﬁgure basic settings.

4. Once the sensor is reading to your clock, place it outside

in a shaded location.

Watch sensor mounting video: http://bit.ly/TH_SensorMounting

SETTINGS

• Hold the SET button to enter the Settings Menu.

• Press the PLUS button to adjust values.

• Press the SET button to conﬁrm and move to the next item

or exit.

Settings Menu Order:

1. Time Zone

2. Daylight Saving Time ON/OFF

3. Language

4. Hour

5. Minutes

6. Year (2 digit)

7. Month

8. Date

9. Weekday

10. 12/24 Hour Format

11. Fahrenheit/Celsius

WWVB ATOMIC TIME SIGNAL

• The WWVB Atomic Time Indicator will ﬂash when searching

for the signal.

• Depending on your location, reception may take up to 5

nights. Generally it will set overnight.

• When WWVB signal is received, the indicator will be solid.

• For information about WWVB Atomic time visit:

http://bit.ly/AtomicTime

ALARM SETTING

• Hold the ALM button to enter Alarm Settings.

• Press the PLUS button to adjust values.

• Press the ALM button to conﬁrm and move to the next item

or exit.

ACTIVATE | DEACTIVATE ALARM

• Press the ALM button to activate or deactivate the alarm.

• The Alarm Indicator will display when active.

Note: The alarm will automatically be activated after setting a

new alarm time.

SNOOZE

• When the alarm sounds, press the SNZ button to silence

the alarm for 10 minutes. The Alarm Indicator will ﬂash.

• Press any button except SNZ to silence the alarm for 24

hours.

Mounting

Holes

Pull Out

Legs

Buttons

on Front

Battery

Compartment

Page | 2 Page | 3 Page | 4

Languages:

US English

F French

E Spanish

d German

This clock can be set to

time zone +/- 12 or

anywhere in between.

North American time zones:

-4h ATL - Atlantic

-5h EST - Eastern (default)

-6h CST - Central

-7h MST - Mountain

-8h PST - Paciﬁc

-9h ALA – Alaska

-10h -Hawaiian

WWVB

Atomic Time

Indicator

Alarm

Indicator

Time Display

Calendar Display

& Moon Phase

Indoor

Temperature

Display

(°F/°C)

Outdoor

Temperature

Display

(°F/°C)

SET + ALM SNZ

Summary of content (2 pages)

PAGE 1
ATOMIC DIGITAL WALL CLOCK OVERVIEW WWVB Atomic Time Indicator ATOMIC DIGITAL WALL CLOCK Time Display Alarm Indicator QUICK START GUIDE Indoor Temperature Display (°F/°C) Outdoor Temperature Display (°F/°C) with Moon Phase and Indoor/Outdoor Temp + ALM SNZ Mounting Holes Battery Compartment Full Manual can be found under the Support Tab here: http://bit.ly/WS-8418U Pull Out Legs Page | 2 Insert 2-AA batteries into the outdoor sensor. Insert 2-AA batteries into the clock.
PAGE 2
WE ’ R E HE R E TO HE LP! CUSTOM DISP L AY • Press and release the PLUS button to show seconds counting in place of Indoor Temperature, Outdoor Temperature, or Weekday. • Press and release the PLUS button again to remove seconds from the display. M OON PH ASE • With the moon shown against a light colored background, the phases will show opposite to a paper calendar. The segments that are highlighted will portray the part of the moon that is lit.