Instruction manual

STORM WARNING THRESHOLD VALUE SETTING

You may also define a switching sensitivity value for the storm warning display at a

decrease of air pressure from .09 inHg to .27 inHg over 6 hours (Default 0.15 inHg).

1. The sensitivity value will start flashing.

2. Use the + or MIN/MAX key to select the value.

3. Confirm with the SET key and enter the STORM ALARM ON/OFF SETTING.

STORM ALARM ON/ OFF SETTING

You may also choose to switch On or Off the acoustic storm warning alarm (Default

OFF).

1. The digit "AOF" will start flashing.

2. Use the + key to switch On or Off the alarm. ("AOF" = OFF; "AON" = On)

3. Confirm with the SET key and the normal display mode will be shown.

Flashing

Alarm-On icon

Note:

In case a storm warning alarm is activated, the downward weather tendency arrow will

be flashing. (Also see WEATHER TENDENCY INDICATOR below)

TO EXIT THE MANUAL SETTING MODE

To exit the manual setting anytime during the manual setting modes, press the

ALARM key (or HISTORY key) or wait for the automatic timeout. The mode will return

to the normal time display.

TIME ALARM SETTING

The alarm time can be set by the use of the ALARM and SET key.

1. Press the ALARM key once. The “ALARM” icon and time digits are shown at the

top right of the LCD.

2. Press and hold the SET key for about 2 seconds. The hour digit of the alarm

time will start flashing. Press the + or MIN/MAX key to set the hour of the alarm

time.

3. Press the SET key to confirm and advance to the minute setting. The minute

digit will be flashing.

Alarm time

digit