Weather Radio User Manual

Positioning The Rain Gauge
Position the connected rain gauge outdoor to collect rainfall data
(maximum length of wire: 33 feet/ 10m). Ensure that the rain gauge is
placed in a secure and flat location where it can properly collect properly
rain quantity without obstruction. Ensure also that the rain gauge is
securely mounted at the appropriate location otherwise it may not
transmit accurate rainfall data.
Maintenance
• Avoid placing the units in locations prone to extreme
temperatures, vibration and shock since these may cause
damage and inaccurate readings.
• When cleaning the display and casing of the Rain Meter
use a soft damp cloth only. Do not use solvents or
scouring agents as they may mark the casing and LCD.
• Do not submerge the Rain Meter in water.
• Immediately remove all low powered batteries to avoid
leakage and damage. Replace only with new batteries of
the recommended type.
• Please do not make any attempt to make any repairs to the
units. Return them to their original point of purchase for
repair by qualified personnel. Opening and tampering
with the units will invalidate the warranty.
Specifications
Rainfall display range: 0 to 9999.99 inch/ 0 to 9999.9 mm
(overflow and will automatically
restart from zero)
Rain meter data updating: immediate when raining
Transmission period-Rain Sensor: immediate when raining
Rain gauge wire length: about 33 feet/ 10 meters
Power source: 2 x AA, IEC LR6 1.5V batteries
Rain Meter dimensions (LxWxH)
Rain Meter: 3.62”x1.22”x4.52”/ 92x31x15mm
Rain Sensor: 5.51”x2.75”x5.39”/140x70x137mm