Installation Guide

3
Use the +/- buttons on
the front of the clock to
adjust the values.
Initial Setup
Power Up
Settings Menu Order
Insert the 5V Power Adapter into an outlet, and then plug it into the AC Jack on the
bottom of the alarm clock. Optional: Insert a CR2032 Coin Cell Battery to backup
Time and Alarm.
A greeting will appear on the LCD display and then your clock will move into the
Settings Menu. The Color Cycle Light Mode will also begin.
Language Hour Minutes Year Month Date Fahrenheit/Celsius
BASICS
Access Settings Menu: After the initial power-up, hold the button on the back of the
clock until the display changes. Only hold or press (tap) one button at a time.
You may exit the Settings
Menu at any time by
tapping the button.
Note: Weekday will set automatically after year, month, & date settings are adjusted.
Press the button on
the back of the clock to
confirm selection and
move to next step.