SET UP GUIDE Model: W74146
Table of Contents BASICS ALARMS LIGHT MODES Initial Power Up 03 Natural Light Alarm 08 Selecting Your Light Mode 12 Buttons & Ports 04 Setting the Light Alarm 09 Light Mode Options 12 Custom LCD Display 05 Setting the Sound Alarm 10 Color Cycle Mode 13 LCD Display Icons 05 Snoozing the Sound Alarm 11 Evening Mode 14 LCD Display Brightness 06 Color Select Mode 15 Auto-Dim Settings 06 Glow Color Options 15 USB Charging Port 07 Temperature 07 APPENDIX SUPPORT Specificat
BASICS Initial Setup Power Up Insert the 5V Power Adapter into an outlet, and then plug it into the AC Jack on the bottom of the alarm clock. Optional: Insert a CR2032 Coin Cell Battery to backup Time and Alarm. A greeting will appear on the LCD display and then your clock will move into the Settings Menu. The Color Cycle Light Mode will also begin.
BASICS Buttons & Ports 7 6 8 9 1 3 2 4 5 1. DISPLAY BRIGHTNESS ( Tap to adjust backlight intensity or hold to enter Auto-Dim settings 10 ) 2. PLUS/MINUS (+/-) Tap to control glow light intensity or hold to adjust settings quickly 5. USB CHARGING PORT 4. GLOW LIGHT ( ) Connect USB charging Tap to toggle through light cable (not included) modes. Tap to confirm light mode selection 3. SNOOZE ( ) Tap to snooze the sound alarm, exit menus, or to turn the light off 6.
BASICS Custom LCD Display Press and release the button to select the calendar in two formats or indoor temperature to display. Weekday, Month, Date Weekday, Indoor Temp. Day, Month, Date, Temp. LCD Display Icons AM/PM Indicator Light Alarm Active Indicator Auto-Dim Active Indicator Sound Alarm Active Indicator Note: Only one light and one sound alarm can be programmed. These can be set to go off together or at separate times.
BASICS LCD Display Brightness Adjusting the LCD Display Brightness Tap the button to adjust the backlight intensity. There are 4 brightness levels, plus an off option. Auto-Dim Settings Program your LCD display to automatically dim during preselected times. 1. Hold the button to enter the Auto-Dim Settings Menu. 2. Tap the +/- buttons to turn the Auto-Dim feature on or off. Tap to confirm. 3. Tap the +/- buttons to adjust the start time. Tap to confirm. 4. Tap the +/- buttons to adjust the stop time.
BASICS USB Charging Port There is a 1 Amp USB Charging Port located on the right side of your alarm clock. • Connect your external device’s USB charging cable (not included) into the USB Charging Port. • Charging times will vary. • USB Power Output: 1 Amp Maximum Current Indoor Temperature View real-time indoor temperature data on your alarm clock. Press and release the button to display Indoor Temperature. You can select Fahrenheit or Celsius in the main Settings Menu (see page 3).
ALARMS Natural Light Alarm The Soluna Light Alarm Clock is equipped with a glowing Light Alarm that simulates the sunrise. Use the Light Alarm to wake up peacefully and help reset your circadian rhythm. Gradual Wake Up The Light Alarm will begin 30 minutes before your set alarm time. The light will gradually increase in intensity until reaching full brightness at your set alarm time. The light will remain on and at full power until a button is pressed.
ALARMS Setting the Light Alarm Setting the Light Alarm 1. Hold the button on the back of the clock to enter the Light Alarm Settings Menu. ALARM will appear on the LCD. 2. Next, use the +/- buttons to set your desired time. Press to confirm. 3. Your Light Alarm is now activated, indicated by ON icon on the LCD. Activating & Deactivating the Light Alarm Alarm Hour 1. Press the button on the back of the clock to view your Light Alarm time and activate/deactivate the alarm. will appear on 2.
ALARMS Setting the Sound Alarm Setting the Sound Alarm 1. Hold the button on the back of the clock to enter the Sound Alarm Settings Menu. ALARM will appear on the LCD. 2. Next, use the +/- buttons to set your desired time. Press to confirm. 3. Next, use the +/- buttons to set your desired snooze duration (5 to 120 minutes). Press to confirm and to exit the Sound Alarm Settings Menu. 4. Your Sound Alarm is now activated, indicated by ON icon on the LCD. Activating & Deactivating the Sound Alarm 1.
ALARMS Snoozing the Sound Alarm Gradual Wake Up The Sound Alarm (Beeps) will increase in frequency over a 2-minute period. After the 2-minute time frame, the alarm will stop if not snoozed or turned off. To stop a sounding alarm, press any rear button. To snooze a sounding alarm, tap the front Snooze ( ) button. Snooze Duration Countdown After the snooze button is pressed, the snooze duration countdown will appear on the LCD. When it reaches 00m, the alarm will sound again.
LIGHT MODES The Soluna Light Alarm Clock features 3 light modes with 14 unique color options, ensuring there’s a glow for every day and mood. Selecting Your Light Mode 1. Tap the button to toggle through the different light modes. 2. Use the +/- buttons to adjust any additional glow color options within the Cycle and Color Select modes. 3. There are two ways to confirm your selection and start the light mode. Either tap the button or simply wait 5 seconds. The selected light mode will then begin.
LIGHT MODES Color Cycle Mode When using the Color Cycle Mode, the light will gradually shift through all of the glow color options. How to Activate Color Cycle Mode 1. Tap the button to toggle through the light modes. CYCLE will appear on the LCD. 2. There are two ways to confirm your selection and start the light mode. Either tap the button or simply wait 5 seconds. The Color Cycle Mode will then begin. Color Cycle Example Color Cycle Examples Use the +/- buttons to adjust the light’s brightness level.
LIGHT MODES Evening Mode The Evening Mode is a 30-minute cycle designed to simulate the setting of the sun. Simply start the mode before bed and the light will gradually dim and shift in color while you fall asleep. After the 30 minutes the light will be off. How to Activate Evening Mode 1. Tap the button to toggle through the light modes. EVENING will appear on the LCD. 2. There are two ways to confirm your selection and start the light mode. Either tap the button or simply wait 5 seconds.
LIGHT MODES Color Select Mode Use the Color Select Mode to choose your favorite glow color. How to Activate the Color Select Mode button to toggle through the light 1. Tap the modes. PICK COLOR will appear on the LCD. 2. Use the +/- buttons to choose your glow color. Glow Color Options 3. There are two ways to confirm your selection and start the light mode. Either tap the button or simply wait 5 seconds. The Color Select Mode will then begin.
APPENDIX Specifications 6.81-in. (17.29 cm) 6.71-in. (17.04 cm) 5.24-in. (13.30 cm) 2.69-in. (6.84 cm) Power Requirements: Primary Power: 5.0V Power Adapter (Included) AC6: HX12H-0501500-AU-001 The plug on the power adapter is intended to serve as the disconnect device, the socket-outlet shall be installed near the equipment and shall be easily accessible. Battery Backup: 1 “CR2032” Coin Cell Battery (not Included) In the event of a power outage, the Battery Backup will keep time.
APPENDIX Coin Cell Battery Replace the coin cell battery. 1. Use a coin to turn battery cover to the left to remove it. 2. Pull back the metal pin and gently remove the battery. 3. Insert a fresh CR2032 battery with the + side up and snap it into place. 4. Replace the battery cover and use the coin to turn it to the right to lock. WARNING 1. This product contains a coin cell battery. 2. If swallowed, it could cause severe injury or death in just 2 hours. 3. Seek medical attention immediately.
APPENDIX Recycling & Disposal Please consider the environment when deciding to dispose of this product. Although household electronics are generally safe to use on a daily basis, incorrect disposal can cause negative and potentially irreversible impacts on our environment. Check with local donation centers to see if your product can be donated for future use. If disposal is the only option, federal agencies, local governments, and certified retailers may have electronic recycling programs in place.
APPENDIX FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
SUPPORT Having Trouble? We’re here to help. For self-help documents and videos visit: bit.ly/w74146_support Scan for Support Still have questions? Use the links below to find additional resources or reach out to our staff directly. Our representatives are available M-F, 8am-6pm CST Self-Help: bit.ly/w74146_support Email: bit.ly/contact_techsupport Phone: 1.608.782.1610 Stay in Touch Ask questions, watch set up videos, and provide feedback on our social media outlets.
