FAQ

9 | Page
“NO NWS”
- This indicates and error on the NWS server. There is nothing you can do for this.
• NWS Expanded Forecast, will not update or show.
• The NWS will resolve this.
• Very rare to have this error.
Note:
When you first connect to the La Crosse View™ app, “NO NWS” may alternate with “ALL
OK” for a few seconds until the station establishes contact with the NWS server.
CAN I MOVE MY STATION TO A NEW HOUSE?
• Yes, it is very easy to move your station to a new location. You will simply need to connect to
the new Wi-Fi.
• If you change your Wi-Fi network, simply go into the La Crosse View™ app, select your
station, and then choose “Connect Wi-Fi” from the app menu. Here, you will just need to
enter your new Wi-Fi network’s login information.
Note:
If switching to a new Wi-Fi network, your station may take up to 3 minutes to reacquire all
sensor information.
ADD SENSORS: HOW CAN I ADD SENSORS TO MY LA CROSSE VIEW™ APP?
Check for compatible sensors to purchase at www.lacrossetechnology.com/V40-PRO
Note:
The number of sensors or stations you can add will be limited by the memory of your
mobile device.
Open your La Crosse View™ app to add sensors.
1. From Main Menu - select “Devices” under “Add/Edit”
2. On Edit Devices page - select “ADD DEVICE”
3. Scan Device ID - Scan the Bar Code on your sensor or choose “ADD MANUALLY” to type in
the number on the bar code. Select “CONTINUE”.
4. On Confirm Device page - Confirm the sensor image and select “YES”
5. On Enter Device and Location Names page - enter Device Name and select a location or
enter a Location Name for your sensor. Select “DONE”.
• Repeat steps 1-5 for any additional sensors you wish to add.
• Allow a few minutes for the new sensors to report to the app.
CAN I CONNECT TO WEATHER UNDERGROUND?
Yes, your station will connect to Weather Underground.
Note:
You will not be able to add additional sensors to Weather Underground.
•
Video support at:
https://www.youtube.com/watch?v=87unKfbxd9c
• Start at 7:54 minutes for video instructions.