FAQ
23 | Page
HIGH RAIN: WHY IS MY RAINFALL READING HIGH?
• Check for sources of RF (radio frequency) interference such as other wireless rain sensors,
ham radios or electric transformers.
• Keep the weather station six feet from cordless phones or wireless routers etc.
Complete a Tip Test:
Write down the Total Rain reading or reset the Rain Total to 0.00. With Rain Sensor mounted
slowly pour water into the funnel to tip the rocker of the rain sensor 10 times. Wait at least 2
minutes for all the rain to collect. Repeat three times.
• Compare these tests. If they still read high then contact support.
HOW CAN I CLEAN THE RAIN SENSOR?
1. Remove rain funnel (pull flat side firmly upward).
2. Gently remove debris or insects inside the rain sensor.
3. Clear debris from drain vents.
4. Clear debris from the rain funnel.
5. Reinstall the rain funnel.
Note:
Do not oil the rain sensor.