FAQ

13 | Page
• HIGH Wind speed (Current speed)
You will need to arm each alert you wish to set.
1. Hold the ALERTS button for 3 seconds to enter alert set mode. The Outdoor LOW
temperature and OFF will show.
2. Use the PLUS or MINUS button to arm the alert if you wish to set the value.
3. Press and release the ALERTS button and the alert value will flash. Use the PLUS or MINUS
button to adjust the value.
4. Press and release the ALERTS button to move to the next alert.
5. Continue steps 2-4 to view or set all of the alerts.
Note:
To skip one or more alerts, simply press and release the ALERTS button until you see the
alert you wish to set. The follow steps 2-4 above.
WHAT HAPPENS WHEN AN ALERT VALUE IS REACHED?
• When armed alert value is reached, station will beep 5 times each minute, until out of the alert
range.
• The flashing alert indicator will indicate the type of alert.
• Press any button to stop the alert from sounding.
• The alert indicator will continue flashing while value while value is in alert range.
HOW DO I SILENCE OR TURN OFF AN ALERT?
Silence Alert Beeps:
To silence an active alert press any button. The alert will stop beeping but
the indicator will flash.
Disarm Alerts:
1. Hold the ALERTS button 3 seconds to enter alert set mode.
2. Press and release ALERTS button until you see the alert you wish to disarm.
3. Press the PLUS or MINUS button to disarm the alert. The alert text goes from ON to OFF.
4. Press the LIGHT button to exit.
TIME: DOES THIS STATION HAVE ATOMIC TIME?
• When operating as a standalone station, the time needs to be set manually on this station.
• When operating as a connected station the time will update from the National Institutes of
Standards and Time (NIST).
HOW DO I MANUALLY SET THE TIME?
When operating as a standalone station, you can manually adjust your station’s settings:
1. Hold the SET button for 3 seconds to enter settings menu.