Installation Guide

Page 6Page 5 Page 7
Page 8
STATION & SENSOR SPECS
V22-WRTHv2 LTV-D1
Indoor Temperature Range 32°F to 122°F (0°C to 50°C) 32°F to 122°F (0°C to 50°C)
Indoor Humidity Range 10% to 99%RH 10% to 99%RH
Relative Pressure Range
23.62 to 32.48 InHg
(800 to 1100 hPa)
n/a
Power Requirements
5.0V AC Adapter
Optional: 3 “AA” batteries
2 “AAA” Batteries
THERMO-HYGRO (LTV-TH2)
• Outdoor Temperature Range: -40°F to 140°F (-40°C to 60°C)
• Outdoor Humidity Range: 10% to 99%RH
• Power Requirements: 2 “AA” Batteries
• Updates every 51 seconds with temperature change
WIND (LTV-W1)
• Wind Speed Range: 0 to 111 MPH (0 to 178 KMH)
• Power Requirements: 2 “C” Batteries
• Updates every 51 seconds with wind speed change
RAIN (LTV-R3)
• Rainfall Range: 0-393.6 inches (0-9999 mm)
• Power Requirements: 2 “AA” Batteries
• Updates every 45 seconds with rainfall change
Sensor Transmission Range: 400 Feet (121.92 Meters) open air
WI-FI NETWORK REQUIREMENTS
• Broadcast Frequency: 2.4GHz (802.11 b/g/n)
• Network Name/Password: Must Not Exceed 45 Characters
• Network Speed: Must Be Greater than 1 Mbps
Note: If you have a multiple band router, be sure your mobile device is connected
to the 2.4GHz frequency when connecting your station to the app.
MOBILE REQUIREMENTS
Apple phones require iOS with Wi-Fi service.
Android phones require Android OS with Wi-Fi service.
STATION ICONS
Wi-Fi Indicator: Will flash when your station is ready to connect
to the Internet, and be solid on screen when connected.
Low Battery Indicators: Individual station/sensor indicators will
let you know which batteries to replace.
Sensor Reception Indicators: Indicate the reception strength
between your sensors and station.
BUTTONS & FUNCTIONS
Buttons located on top of Color Weather Station
SET Hold for basic settings. Press to view Wi-Fi status.
TEMP, WIND, RAIN Press to view history.
LIGHT Press to adjust backlight brightness.
+ or  Use + or – to adjust values in settings.
+ &  Hold both buttons to search for Wi-Fi.
SENSOR
Press to view station and sensor ID numbers, hold the MINUS (-) button
to remove and begin searching for new sensor connection.
RAIN & LIGHT
Hold both buttons to factory reset the station.
All sensor ID’s, History, and Wi-Fi settings will be reset.
STANDALONE SETTINGS
Don’t want to connect with the app? No worries! Your station will
still function as a standalone unit to provide you with backyard
conditions. Simply hold the SET button to access the Settings
Menu to adjust your time, date, and other settings.
Settings Menu Order:
• Beep ON/OFF • 12/24 Hour Format • Hour • Minutes • Year
• Month • Date • Fahrenheit/Celsius
WARRANTY INFO
La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product
relating to manufacturing defects in materials & workmanship.
La Crosse Technology, Ltd, 2830 S. 26th St., La Crosse, WI 54601
For Full Warranty Details, Visit: www.lacrossetechnology.com/support
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also
complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any
other antenna or transmitter. End-users and installers must be provided with antenna installation instructions
and consider removing the no-collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed
using electronic, mechanical or chemical process without the written permission
of the publisher.
This booklet may contain errors or misprints. The information it contains is regularly checked and corrections
are included in subsequent editions. We disclaim any responsibility for any technical error or printing error, or
their consequences. All trademarks and patents are recognized.
WARNING: This product can expose you to chemicals including styrene, which is known to the State of
California to cause cancer. For more information go to: www.P65Warnings.ca.gov
If you require additional support, get in touch with our friendly customer support
team based out of La Crosse, WI.
Phone: [phone]
Online: bit.ly/contact_techsupport
Our knowledgeable customer support team is available:
Monday-Friday, 8am-6pm CST.
JOIN THE CONVERSATION
Ask questions, watch detailed setup videos, and provide feedback on our social
media outlets!
WE’RE HERE TO HELP!
LA CROSSE TECHNOLOGY
®
PATENTS
Visit www.lacrossetechnology.com/patents for patent information.
BONUS DISPLAY
Hold the SET/IN/OUT button to access the Settings Menu.
Setting Menu Order:
• 12/24 Hour Time • Hour • Minutes • Fahrenheit/Celsius
SET/IN/OUT
Press to toggle Indoor and Outdoor readings.
Hold to enter the Settings Menu.
/SEARCH
Press to change values in the Settings Menu.
Hold to search for the Outdoor Sensor
CARE + MAINTENANCE
•
Do not mix old and new batteries.
•
Do not mix Alkaline, Lithium, standard, or rechargeable batteries.
•
Always purchase the correct size and grade of battery most suitable for intended use.
•
Clean the battery contacts and also those of the device prior to battery installation.
•
Ensure the batteries have with correct polarity (+ / -).
•
Remove batteries from equipment that will not to be used for an extended period.
•
Promptly remove expired batteries.