Full Product Manual

Page | 3Wi-Fi Professional Station
1. Insert 2 - C batteries into your LTV-W1 Wind Sensor.
2. Insert 2 - AA batteries into your LTV-R3 Rain Sensor.
3. Insert 2 - AA batteries into your LTV-TH2 Thermo-Hygro Sensor.
4. 5 volt power cord (required) into V22-WRTHv2 station
*3-AA batteries for optional backup of your time and date
5. 2-AAA batteries into LTV-D1 bonus station
6. Download the La Crosse View™ App (App Store or Google Play)
7. Follow along with our instructional videos to connect your station to the app:
http://bit.ly/LaCrosseView_Support_Vid_01_1
http://bit.ly/LaCrosseView_Support_Vid_01_2
8. Mount your sensors in appropriate locations.
*Battery operation only, station will not update sensor or Wi-Fi data. Power cord is required.
QUICK SETUP
THERMO-HYGRO
Keep out of direct sunlight & ensure the sensor is well-ventilated.
• We recommend mounting it on a north-facing wall under an eave or deck for best results.
WIND SPEED
Ensure the sensor is mounted vertically  an unobstructed rooftop is ideal.
• Your wind sensor should be the tallest object in the area to avoid educed wind speed values.
RAIN
Mount in an open area, preferably o the ground on a level platform.
• Clean out the bucket regularly to avoid debris; this can aect readings.
QUICK MOUNTING TIPS
Buttons located on top of Profesional Weather Station
SET
Hold for basic setting. Press to view Wi-Fi status.
TEMP, WIND, RAIN
Press to view history.
LIGHT
Press to adjust brightness.
+ or –
Use + or – to adjust values in settings.
+ & –
Hold both buttons to search for Wi-Fi.
SENSOR
Press to view sensor ID numbers, then hold PLUS (+) to search, or hold MINUS (–) to
remove.
RAIN & LIGHT
Hold both buttons together to reset all sensor ID’s and Wi-Fi settings.
BUTTON FUNCTIONS