FAQ

6 | Page
8. (When the alert is OFF (disarmed) press ALERTS button to skip setting that alert value).
Note:
Press the LIGHT button at any time to exit.
HOW DO I DISARM ALERTS?
1. Hold the ALERTS button 3 seconds to enter alert set mode.
2. Press and release ALERTS button until you see the alert you wish to disarm.
3. Press the +/- buttons to disarm the alert. The alert text goes from ON to OFF.
4. Press the LIGHT button to exit.
WHAT HAPPENS WHEN AN ALERT SOUNDS?
• When armed alert value is reached, station will beep 5 times each minute, until out of alert
range.
• The flashing alert icon will indicate the type of alert HI or LO.
• Press any button to stop the alert from sounding.
• The alert icon will continue flashing while alert value is in alert range.
• Disarm the alert to stop the alert entirely.
HOW DO I VIEW MY HI AND LO TEMPERATURE/HUMIDITY READINGS?
Your high and low temperature and humidity readings are recorded with time and date of
occurrence. Each time a new high or low reading is recorded, that reading with time and date of
occurrence will show.
To view your HI | LO records, simply press and release the TEMP button.
Viewing order:
• Outdoor HI Temperature
• Outdoor LO Temperature
• Outdoor HI Humidity
• Outdoor LO Humidity
• Indoor HI Temperature
• Indoor LO Temperature
• Indoor HI Humidity
• Indoor LO Humidity
• Feels Like HI
• Feels Like LO
• Dew Point
Note:
Dew Point does not have a time/date of occurrence.