FAQ

La Crosse Technology, Ltd Page 5
 Weekend- Will only alarm Saturday and Sunday when active. (Clock icon with 2
lines below)
• Press and release the ALARM button to view alarm time.
• With alarm time showing, hold the ALARM button for 3 seconds to enter alarm
settings.
• Set the time then select alarm type:
(Single alarm, Mon-Fri alarm, or Weekend alarm)
• Setting and activating the alarm are separate functions.
Set Alarm:
1. Press and release the ALARM button to view alarm time.
2. With alarm time showing, hold the ALARM button for 3 seconds to enter alarm
time set mode.
3. Press the +/- buttons to adjust the alarm hour.
4. Press the ALARM button to confirm and move to the minutes.
5. Press the +/- buttons to adjust the alarm minutes.
6. Press the ALARM button to confirm and move to alarm type.
7. Use the +/– to select SINGLE, MON-FRI or WEEKEND alarm.
8. Press the ALARM button to confirm and exit.
Note: This is a crescendo alarm. It will sound for two minutes then shut off
completely if no buttons are pressed.
Activate/Deactivate Time Alarm
 When you finish settings, the alarm is active.
 From the normal time display, press and release the ALARM button to view
alarm.
 Press and release the SET button to deactivate or to activate the alarm.
 When active the alarm clock icon will show.
 The clock icon will not show if the alarm is not active.
Snooze Alarm
 When the alarm sounds, if SNOOZE is pressed, SNOOZE - duration will show in
date area.
 During snooze count down, press any button except for SNOOZE/LIGHT to exit
snooze count down
 During snooze count down, press SNOOZE/LIGHT only to change backlight.
 When snooze alarm sounds, SNOOZE – duration “00m 00” will flash, press any
button except for SNOOZE/LIGHT to stop ringing and exit snooze function.
 Repeat snooze: When snooze alarm sounds, SNOOZE – duration “00m 00”” will
flash. Press SNOOZE/LIGHT button to stop ringing and activate the snooze
function again.
USB Charge Port
Explanation: The alarm clock has two integrated USB charging ports that will
charge a device when operating on AC power.