FAQ

La Crosse Technology, Ltd Page 3
 Use the program menu to display the indoor temperature in Fahrenheit or
Celsius.
 Insert fresh alkaline batteries with correct polarity.
 If the indoor temperature is still shows dashes, HH.H or LL.L, the alarm clock
may need replacement.
Does the clock have a backlight?
Yes, this alarm clock has a backlight.
AC adapter:
The backlight can show continuously when operating the alarm clock with the 5-volt
AC adapter.
 HIGH: The backlight is defaulted to HI (brightness) when the AC adapter is in
use.
 LOW: Press and release the SNOOZE/LIGHT button to dim the intensity of the
backlight.
 OFF: Press and release the SNOOZE/LIGHT button to turn the backlight off to
sleep.
Note: When the AC adapter is NOT in use, the HIGH-LOW-OFF backlight feature is
not available.
Note: When the backlight is off, press any button to activate the backlight for 10
seconds, and then it will turn off again.
Battery power:
Press and release the SNOOZE/LIGHT button and the backlight will show for 10
seconds, when operating on batteries only.
Try this exercise in a dim room. The weather station has a bright, dim and OFF
setting for the backlight. Wait 15 seconds after pressing the SNOOZE/LIGHT button
to see if backlight stays on. This will assure it is not in OFF mode.
1. Check that the AC cord is inserted correctly to the weather station and the
outlet.
2. Remove the batteries.
3. Press the SNOOZE/LIGHT button. If the backlight comes on and the display is
active your AC cord works.
4. Wait 15 seconds to see if the back light stays on.
5. If the backlight goes out after 15 seconds, repeat #3.
Time is inaccurate
 This clock has manual set time. Use the program menu to set the time.
Daylight Saving Time