Manualshelf

Installation Guide

ManualsBrandsLa Crosse Technology ManualsGarden CenterWireless Digital Color Forecast Station with Alerts
12345678910
La Crosse Technology, Ltd. www.lacrossetechnology.com/support Page 8
• Outdoor HIGH Humidity ON/OFF
• Outdoor HIGH Humidity Value
• Indoor LOW Temperature ON/OFF
• Indoor LOW Temperature Value
• Indoor HIGH Temperature ON/OFF
• Indoor HIGH Temperature Value
• Indoor LOW Humidity ON/OFF
• Indoor LOW Humidity Value
• Indoor HIGH Humidity ON/OFF
• Indoor HIGH Humidity Value
Set Alerts:
1. Hold, then release the ALERTS button to enter alert settings.
2. Press and release the +/- buttons to arm (ON) the alert if you wish to set it (leave alert
OFF to skip and move to next alert).
3. When the alert is armed (ON) press and release the ALERTS button to move to the alert
value.
4. Press and release the +/- buttons to adjust alert values.
5. Press and release the ALERTS button to confirm & move to the next alert.
6. Press the LIGHT button at any time to exit settings.
Weather Station
12-Hour or 24-Hour time format
Time can display in 12-hour (am, pm) or 24-hour format.
Default is 12-hour time.
Use the Program Menu
to switch time formats.
Fahrenheit/Celsius
Use the program menu to switch between Fahrenheit and Celsius.
Backlight
When operating with the power cable, the backlight is adjustable: HI-LOW-OFF.
Press and release the LIGHT button to adjust backlight.
When operating on batteries only, the backlight will come on briefly when the LIGHT
button is pressed.
Battery power: When operating on battery power only, press and release the any button
and the backlight will show for 10 seconds.
Try this exercise in a dim room. The weather station has a bright, dim and OFF setting for
the backlight. Wait 15 seconds after pressing the LIGHT button to see if backlight stays on.
This will assure it is not in OFF SET.
1. Check that the AC cord is inserted correctly to the weather station and the outlet.
2.
Remove the batteries.
3.
Press the LIGHT button. If the backlight comes on and the display is active your AC
cord works.
4.
Wait 15 seconds to see if the back light stays on.
5.
If the backlight goes out after 15 seconds, repeat #3.