FAQ
La Crosse Technology, Ltd. www.lacrossetechnology.com/support Page 7
Mounting/Positioning Outdoor sensor
First: Place the outdoor sensor in the desired shaded location and the weather station in
the home. Wait approximately 1 hour before permanently mounting the outdoor sensor to
ensure that there is proper reception.
POSITION
Outdoor:
• Protect the outdoor sensor from standing rain or snow and from the overhead sun,
which can cause it to read incorrectly.
• Mounting under an eave or deck rail works well.
• If you choose, you can construct a small roof or box for the outdoor sensor. Be sure a
box has vents.
• Mount the outdoor sensor on the North side where to prevent sun from causing
incorrect readings.
• Mount at least 6 feet in the air for a strong RF (radio frequency) signal.
• Do not mount the outdoor sensor on a metal fence. This significantly reduces the
effective range.
• Outdoor sensors are water resistant, not waterproof.
• Mount outdoor temperature sensor vertically.
• Avoid more than one wall between the outdoor sensor and the weather station.
• The maximum transmitting range in open air is over 300 feet (91 meters).
• Obstacles such as walls, windows, stucco, concrete and large metal objects can
reduce the range.
• Do not mount near electrical wires, transmitting antennas or other items that will
interfere with the signal.
• RF (radio frequency) signals do not travel well through moisture or dirt.
MOUNT
Option 1:
• Install one mounting screw (not included) into a wall.
• Place the outdoor sensor onto the screw (hanging hole on the backside).
• Gently pull down to lock the screw in place.
Option 2:
• Insert the mounting screw through the front of the outdoor sensor and into the wall.
• Tighten the screw to snug (do not over tighten).
Position Weather Station
• The weather station has a pull out stand to sit on a desk or table or can be wall
mounted.
• Place within range of the outdoor sensor.
• The maximum transmitting range in open air is 300 feet (91 meters).
• Choose a location 6 feet or more from electronics such as cordless phones,
wireless gaming systems, televisions, microwaves, routers, baby monitors, etc.,
which can prevent signal reception.










