User's Manual

• The maximum wireless transmission range to the station is over 330
feet (100 meters) in open air, not including walls or trees.
• Mount sensor vertically.
• Cups should be on the top of the sensor.
• Attach to mounting surface with screws through the mounting
bracket.
• The sensor can be mounted from the bottom or from the side.
Alternatively:
• Insert your own mounting pole sensor.
• Tighten screws
• Mounting bracket would not be used.
Replace Wind Cups
1. Loosen the screw on side of cups
2. Remove cups
3. Install new cups
4. Tighten screw
S85807 www.lacrossetechnology.com/S85807 Page | 14