Professional Weather Station FORECAST HI OUTDOOR WIND SPEED LO MPH TOP SPEED LO 1 HR N FEELS LIKE HI W E HUMIDITY LEVEL LO S INDOOR HI 1 RAIN in 0.5 0 For online video support: http://bit.ly/LaxTechTalk Instructional Manual Model: S85807 DC:090616 Protected under U.S.
Table of Contents Setup Preparation .................... Setup ..................................... Display Icons .......................... Wind Readings ........................ Wind History ........................... Rain Readings | History ............ Temperature/ Humidity HI | LO . Weather Alerts ........................ Set Weather Alerts ................... Weather Forecast Icons ............ Seasonal Trees ........................ Sensor Search ......................... Mounting Instructions ....
Setup Preparation Here are some items needed to setup your station (not included): 1. Phillips head screwdriver for assembly. 2. Fresh Batteries: 5 (five) AA alkaline or lithium batteries for the sensors. 3 (three) AAA alkaline batteries for the station (optional). For best results: • Remove weather station and sensors from the package and place together on a table or bench, within easy reach. • Place batteries and screwdriver within reach of setup location.
Configure basic settings. Hold the SET button to enter settings. Press and release the +/buttons to make adjustments and the SET button to confirm.
7. Year 8. Month 9. Date 10. Fahrenheit | Celsius 11. Wind Direction (degrees | letters) 12. Wind Speed (MPH | KMH) 13. Rain (INCH | MM) • Press the LIGHT button at any time to exit. • After 30 seconds with no button press, the station will default back to normal time display. S85807 www.lacrossetechnology.
Display icons WIFI Strength Temperature Trend Arrows Percent Humidity Sensor Strength Humidity HI | LO Alert Wind Direction Fahrenheit | Celsius Wind Speed Forecast Icon Seasonal Trees Rainfall Graph Wind Readings • Current Speed: Highest speed past 30 seconds • Top Speed: Highest speed in the past hour • Feels Like: Temperature | Humidity | Wind Speed • Wind Direction: In letters or degrees • History: Press and release the WIND button to view: 1 Hour (default) | 24 Hour | 7 Days | Month | Yea
Wind History Press and release the WIND button to view the maximum wind history values. • One Hour: past 60 minute period (default Top Speed record, already shown) • 24-hour: Past 24 hour period, from last record • 7 Days: Past 7-day period, from last record • Month: Defined by Calendar Month i.e. January 1 - January 31 • Year: Defined by Calendar Year i.e. January 1 - December 31 Reset Wind Speed History: • Press the WIND button to view individual wind speed readings.
• Select your rain history and the station will keep your selection. • After viewing a history record for 5 seconds, the station will return to the normal view. One Hour 24 Hours Day (12:00am - 11:59pm) 7 Day Month Year Total Reset Rainfall Readings (each resets individually): • Press the RAIN button to view individual rain readings. • Hold the MINUS button for five seconds to reset the individual value. • Rainfall reading will reset to 0.00 Page | 7 www.lacrossetechnology.
Temperature/Humidity HI | LO Readings Press and release to view HI/LO temperature and humidity readings with time/date stamp. • Outdoor temperature HIGH • Outdoor temperature LOW • Outdoor humidity HIGH • Outdoor humidity LOW • Indoor temperature HIGH • Indoor temperature LOW • Indoor humidity HIGH • Indoor humidity LOW • Feels like HIGH • Feels like LOW • Outdoor dew point Note: Feels Like and Dew Point is not time/date stamped.
Indoor Humidity HI Indoor Humidity LO Feels Like HI Feels Like LO Dew Point Types of Weather Alerts There are 20 weather alerts available on this weather station.
• • • • Indoor Indoor Indoor Indoor LOW Humidity ON/OFF LOW Humidity Value 10%RH-99%RH HIGH Humidity ON/OFF HIGH Humidity Value 10%RH-99%RH • 24-hour Rainfall ON/OFF • 24-hour Rainfall Value 0-393 inches (0-99.9mm) • High Wind Speed ON/OFF (CURRENT wind) • High Wind Speed Value 0-111.8 (0-180kph) (CURRENT wind) Set Weather Alerts Hold the ALERTS button 2 seconds to enter alert set mode. Outdoor Low Temperature alert OFF will show. ALERT ON: 1. Press the +/- buttons to arm the alert. 2.
Weather Forecast Icons • The forecast icons are determine by the barometric pressure sensor. • The tendency arrow show the changes on the barometric pressure is rising or falling. • When Outdoor temperature is below 32 F and the forecast is RAIN or T-STORM, the LCD will display SNOW. SUNNY RAIN PARTLY CLOUDY T-STORM CLOUDS SNOW Seasonal Trees • The trees and foliage color will change seasonally. The dates are programmed into the weather station for the scene to change automatically.
Sensor Search Each sensor has a unique ID and will be “parked” to the correct sensor location on the display until manually deleted. • If sensor loses connection to the weather station for any reason, the weather station will show dashes after 30 minutes. • The weather station will search for 5 minutes every hour to reconnect with sensor. 1. In normal mode press and release the SENSOR button to view individual sensor ID’s for up to 15 seconds. 2.
Mounting Instructions TX232TH-LCD Temperature/Humidity Sensor Option 1: • Install one mounting screw into a wall leaving some extended. • Place the transmitter onto the screw, gently pull the transmitter down to lock the screw into place. Option 2: • Insert the mounting screw through the front of the transmitter and into the wall. • Tighten the screw to snug (do not over tighten). • Mount the temperature/humidity sensor on a north-facing wall or in any well shaded location. Sun will make it read high.
• The maximum wireless transmission range to the station is over 330 feet (100 meters) in open air, not including walls or trees. • Mount sensor vertically. • Cups should be on the top of the sensor. • Attach to mounting surface with screws through the mounting bracket. • The sensor can be mounted from the bottom or from the side. Alternatively: • Insert your own mounting pole sensor. • Tighten screws • Mounting bracket would not be used. Replace Wind Cups 1. 2. 3. 4.
Replace Directional Vane 1. 2. 3. 4. Loosen the screw on side of vane Remove direction vane Install new vane Tighten screw Factory Restart The factory reset will return the weather station to its default settings. This will clear all previous recorded history, so you may want to write down data before taking this step. 1. Hold the LIGHT and ALERTS buttons together for 5 seconds to reset the weather station, clear all records, and return all settings to default. 2.
Follow Us on Social Media S85807 www.lacrossetechnology.
WIFI Icon • The connected icon will flash while station is searching for WIFI connection. It will flash up to 1 hour. • The station must operate on AC power for the WIFI to work. Slow Flash - no WIFI network connection-check connection Fast Flash - configure Weather Connect APP Solid - Connected Not displayed -No WIFI router-check router Note: Hold the PLUS and MINUS buttons together for 3 seconds to reconnect, if WIFI signal is lost.
Specifications Indoor TH Sensor Multi-sensor Power • Temperature Range: 32°F to 122°F (0°C to 50°C) • Humidity Range: 10% to 99% RH • Update interval: About every 60 seconds • • • • Temperature Range: -40°F to 140°F (-40°C to 60°C) Humidity Range: 10% to 99% RH Update interval: About every 58 seconds Transmission Range: 330 ft (100 m) RF 915MHz open air • • • • • Wind Speed Range: 0-111.8 mph (0-180 kMh) Wind Direction: 0-359 degrees Rainfall: 0-393.
Warranty and Support La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to manufacturing defects in materials & workmanship. Before returning a product, please visit the product web page for more information or contact our friendly customer support: Online product web page: www.lacrossetechnology.com/S85807 Phone:1-608-785-7921 View full warranty online at: http://www.lacrossetechnology.
