Installation Guide

Model: S83301 www.lacrosseclock.com/support Page | 2
Get Started
Step 1: Insert the included 6-volt AC power adapter into the wall outlet then into the
weather radio.
Step 2 (Optional): Insert 3 new “AAA” batteries (not included) into the radio.
Observe the correct polarity.
Step 3: The radio automatically searches for the first available weather band
channel for 30 seconds. Press the TORNADO ONLY / ALL ALERTS button
to confirm the channel.
Note: If the radio does not immediately turn on, press the POWER button one time.
Easy One Button Alerts Selection: Tornado Only or All Alerts
Select Tornado Only Alerts:
• Filter out unwanted alerts when you want to sleep.
• The NOAA Weather Radio will default to All Alerts.
• One button will quickly select Tornado Only Alerts.
1. Press the TORNADO ONLY/ALL ALERTS button to toggle between Tornado
Only Alerts and All NOAA Alerts.
2. Hold the TORNADO ONLY/ALL ALERTS button to enter (or exit) standby mode
for either alert selection.
3. The blue Armed light will flash every 5 seconds in standby mode.
Select All Alerts (default):
• The NOAA Weather Radio will default to All Alerts when first powered on.
• If you have previously selected Tornado Only Alerts, one button will quickly
select All Alerts.
1. Press the TORNADO ONLY/ALL ALERTS button to toggle between Tornado
Only Alerts and All NOAA Alerts.
2. Hold the TORNADO ONLY/ALL ALERTS button to enter (or exit) standby mode.
3. The blue Armed light will flash every 5 seconds in standby mode.
Blue Armed
Light
Blue Armed
Light