FAQ

La Crosse Technology, Ltd. Page 2
 Press and release the POWER button to turn ON or turn OFF the radio
Note: The radio saves the last channel you are listening to, mode and volume
used, when turned off.
 When the radio is on, hold the POWER button to enter setting menu.
Volume
 In any radio mode, press and release the -VOL+ button to adjust the volume to
a desired level. Levels 1-16 are available.
 Hold the -VOL+ button to change faster.
Restart
1- Remove batteries and AC cord for 15 minutes.
2- Insert the included 6-volt AC power adapter into the wall outlet then into the
weather radio.
3- Insert 3 new “AAA” batteries (not included) into the radio. Observe the correct
polarity
4- The radio turns on automatically and searches for the first available weather
band channel for 30 seconds.
5- Press button 6 (TORNADO ONLY / ALL ALERTS) to confirm the channel.
Alert Status Lights
 During an active advisory, watch, or warning the corresponding status indicator
will be lit until the alert time expires.
Tornado Only Alerts or All Alerts
 The NOAA Weather Radio will default to All Alerts when first powered on.
 One button activates the TORNADO ONLY OPTION.
 No programming required.
 This filters out unwanted alerts when you want to sleep.
1- Press the TORNADO ONLY / ALL ALERTS button to toggle between Tornado Only
Alerts and All NOAA Alerts.
2- Hold the TORNADO ONLY / ALL ALERTS button to enter (or exit) standby mode
for either alert selection.
3- The blue Armed light will flash every 5 seconds in standby mode.
Tornado Only Alerts Active
The radio will alert you to Tornado watches and warnings only. Other types of alerts
will be ignored.
 Backlight flashes red for watches and warnings.
 The alert message will scroll across the top of the LCD.
 The volume level will increase to level 16 (the maximum sound) automatically.
 Press the -VOL+ button to adjust the volume as needed.
 The radio will stop broadcasting when the final tone of the message is received.
 If a tone or audio alert is automatically activated it must remain active for at
least 8 seconds.