User's Manual

10
Outdoor data signal
reception indicator
Outdoo
r
temperature
in ºC/ºF
Outdoor relative
humidity in RH%
TOGGLING AND RESETTING THE MIN/MAX DATA
TO VIEW THE MIN/MAX DATA
Press the MIN/MAX key several times to view the
MIN/MAX indoor temperature, and MIN/MAX outdoor
temperature sequentially.
TO RESET THE MIN/MAX DATA
Press and hold MIN/MAX key for 3 seconds to reset all
the indoor and outdoor temperature to current
temperatures.
LOW BATTERY INDICATOR
Low battery indicator is displayed on the LCD when the
batteries require changing.
ABOUT THE THERMO-HYGRO TRANSMITTER
The range of the thermo-hygro transmitter may be affected
by the temperature. At cold temperatures the transmitting
distance may be decreased. Please bear this in mind
when positioning the transmitters. Also the batteries may
be reduced in power for the thermo-hygro transmitter.
CHECKING FOR 915MHz RECEPTION
If the outdoor temperature and humidity data are not being
received within three minutes after setting up (or outdoor
display always show “- -.-” in the outdoor section of the
Weather station during normal operation), please check
the following points:
1. The distance of the weather station or transmitters
should be at least 5 to 6.5 feet (1.5 -2 meters) away
from any interfering sources such as computer
monitors or TV sets.
2. Avoid placing the transmitters onto or in the
immediate proximity of metal window frames.
3. Using other electrical products such as headphones
or speakers operating on the 915MHz-signal
Low battery
indicator
(transmitter)