Quick Start Guide

ACCUWEATHER FORECASTS
Other benefits of connecting your station to the La CrosseView™
app include Daily and Hourly Forecasts from AccuWeather. These
will display changes in your station’s Weather Icons, HI/LO Temps,
Wind Direction, and Chance of Precipitation values.
DAILY FORECAST
Press the DAILY button to view predictions for each of the next 7
days of weather data.
HOURLY FORECAST
Press the HOURLY button to view predictions for each of the next
12 hours of forecast data.
Note: These buttons will not provide a function if your station is not
connected to the La Crosse View app.
BUTTONS & FUNCTIONS
Buttons located on top of Color Weather Station
Buttons located on side of Color Weather Station
SET Hold for basic setting. Press to view Wi-Fi status.
TEMP, WIND, RAIN Press to view history.
LIGHT Press to adjust brightness. Hold to set Auto Dim.
+ or  Use + or – to adjust values in settings.
+ &  Hold both buttons to search for Wi-Fi.
SENSOR
Press to view sensor ID numbers, then hold PLUS (+) to search, or hold
MINUS (–) to remove.
DAILY, HOURLY Press to see forecast. Must be connected to Wi-Fi.
RAIN & LIGHT Hold both buttons to reset all sensor ID’s and Wi-Fi settings.
EXTRA SENSOR
Press to toggle through “extra sensor” & Barometric Pressure. Hold to
add Sensors.
WE’RE HERE TO HELP!
If you require additional support, call our friendly customer support
representatives based out of our office in La Crosse, Wisconsin.
(2830 26th ST S.)
Phone: [phone] Online: bit.ly/contact_techsupport
Our knowledgeable customer support team is available:
Monday-Friday, 8am-6pm CST.
JOIN THE CONVERSATION
Ask questions, watch detailed setup videos, and provide feedback
on our social media outlets!
STATION ICONS
Wi-Fi Indicator: Will flash when your station is ready to connect
to the Internet, and be solid on screen when connected.
Internet Indicators: Will display in areas to indicate data
coming from the Internet.
Low Battery Indicators: Individual station/sensor indicators will
let you know which batteries to replace.
Sensor Reception Indicators: Indicate the reception strength
between your sensors and station.
• Use the hole at the top to hang your
sensor from the back using a nail. Or,
insert one mounting screw through the
front of your sensor.
• Mount your sensor on a north-facing
wall or in any shaded area. Under an
eave or deck rail is preferred to avoid
inaccurate readings from the sun.
• The maximum wireless transmission
range to the station is up to 400 feet
(121 meters) in open air, not including
walls or floors.
• Be sure your sensor is mounted
vertically, to allow moisture to drain out
properly.
Adding Sensors to Your Station
Whether you choose to connect to the La Crosse View app or not,
this station can display data for up to 4 extra sensors. This data will
appear in the light green section on the LCD and in your La Crosse
View app if connected.
If you have multiple add-on sensors connected, press the EXTRA
SENSOR button to cycle through the data you’d like displayed on
the LCD.
The relative pressure data shares space with the extra sensors(s).
*Water Leak Sensor Example
SENSOR PLACEMENT AND MOUNTING
ADD-ON SENSORS
1. Hold the EXTRA SENSOR button until the Sensor Reception
Indicator starts to animate.
2. Install batteries into your sensor. If the sensor has a TX button,
press it to force a transmission signal. This button is usually
located in or near the sensor’s battery compartment. The LED
light on the sensor will flash once.
3. Your sensor should connect within the next 3 minutes, briefly
displaying its ID and type on the LCD. The Sensor Reception
Indicator will show solid on the screen when a sensor is
connected
Note: When first powering up, or after a factory reset, extra
sensors should automatically connect to your station.
Page 6 Page 7 Page 8Page 5
For weather station V30v4
For weather station V30v4