Instructions / Assembly
Temperature/Humidity Alerts
First you will arm the alert you wish to set, then you set the alert value.
If an alert is not armed (OFF), you will skip that alert value and move
to arm the next alert.
1. Hold, then release the ALERTS button to enter alert set mode.
2. Press and release the +/- buttons to arm (ON) the alert if you wish
to set it (leave alert OFF to skip and move to next alert).
3. When the alert is armed (ON) press and release the ALERTS button
to move to the alert value.
4. Press and release the +/- buttons to adjust alert values.
5. Press and release the ALERTS button to conrm & move to the next
alert.
6. Press the BACKLIGHT button at any time to exit settings.
Alert Setting Order:
• Outdoor HIGH Temperature ON/OFF
• Outdoor HIGH Temperature Value
• Outdoor LOW Temperature ON/OFF
• Outdoor LOW Temperature Value
• Outdoor HIGH Humidity ON/OFF
• Outdoor HIGH Humidity Value
• Outdoor LOW Humidity ON/OFF
• Outdoor LOW Humidity Value
• Indoor HIGH Temperature ON/OFF
• Indoor HIGH Temperature Value
• Indoor LOW Temperature ON/OFF
• Indoor LOW Temperature Value
• Indoor HIGH Humidity ON/OFF
• Indoor HIGH Humidity Value
• Indoor LOW Humidity ON/OFF
• Indoor LOW Humidity Value
Note: When no HI or LO Temperature Alert is set, OFF will show.
C85845 www.lacrossetechnology.com/support Page | 6