Installation Guide

Wireless Color Weather Station
Model: C85845
DC:013018
POWER UP
1. Insert 2-AA batteries into your sensor.
2.Insert the 5.0 volt power cord into an outlet, then into your
station.
3.Optional: Install 3-AAA batteries into your station.
4.Once the sensor is reading to your station, place sensor
outside in a shaded location. Watch sensor mounting video:
http://bit.ly/TH_SensorMounting
AA AA
• The station will search for the atomic signal at UTC 7:00, 8:00, 9:00,
10:00, and 11:00.
• If there is no WWVB atomic time reception, the station will search for the
signal every 2 hours until the signal is received.
• The atomic time signal icon will flash while searching. The tower icon will
be solid when it has connected.
• After reception, station searches for the atomic signal after midnight.
• From normal time display, press and release the SET button to search for
the WWVB atomic time signal.
• For information about WWVB Atomic time visit: http://bit.ly/AtomicTime
SETTINGS
POSITION SENSOR OUTSIDE
• Keep your sensor out of direct sunlight in a well ventilated area.
• We recommend mounting it on the north side of your home
under an eave or deck rail.
• Transmission range is 300 feet (91 meters) in open air.
• Watch sensor mounting video: http://bit.ly/TH_SensorMounting
Time Zones
AST = Atlantic
EST = Eastern
CST = Central
MST = Mountain
PST = Pacific
AKT = Alaska
HAT = Hawaii
OTHER BUTTON FUNCTIONS
• BACKLIGHT: Press to adjust or turn off backlight.
• ALERTS: Hold enter alert set mode. Press the + or - button to arm
or disarm an alert. Press ALERTS to toggle between armed alerts.
Press the + or - button to set alert values.
• Hold ALARM: Set alarm time. Use the + or - button to adjust.
Press ALARM button to confirm.
• SNOOZE: Press SNOOZE (when alarm sounds): To silence
alarm for 10 minutes.
• Press ALARM: To view alarm time. Press again to activate/deactivate
time alarm. The alarm icon will display when active.
• Press SET: Start or stop WWVB search. Tower icon will flash.
• TEMP: Press to view daily HI and LO Temperature, Humidity, Heat
Index and Dew Point. Hold TEMP to search for sensor.
Page | 2 Page | 3 Page | 4
INDOOR | OUTDOOR COMFORT CHARTS
• Indoor & Outdoor comfort charts keep you
informed when the humidity is at a comfortable
level.
• The bar over the chart will move to indicate
the humidity level.
AAA
AAA
AAA
ATOMIC TIME SIGNAL
• Hold, then release the SET button to enter the Settings Menu.
• Press and release the + or - buttons to adjust the values. Hold to adjust
quickly.
• Press and release the SET button to confirm and move to the next item.
• Press and release the BACKLIGHT button any time to exit settings.
Settings menu order:
1. Language
2. Beep ON/OFF
3. Atomic ON/OFF
4. Time Zone
5. DST ON/OFF
6. 12H/24H
7. Hour
8. Minutes
9. Year
10. Month
11. Date
12. Fahrenheit/Celsius
Note: Weekday will set automatically as Year, Month and Date are set.
Note: When Español is selected, instructions will be in Spanish.
Note: When Atomic OFF is selected, move directly to 12/24 hour time.