Full Product Manual

Arm & Disarm Alerts:

1. Hold the ALERTS button 3 seconds to enter alert set mode.

2. Press and release ALERTS button until you see the alert you wish to arm or disarm.

3. Press the + or - buttons to arm or disarm the alert. (If you arm and alert, the next step will be to set alert

value).

4. Press the BACKLIGHT button to exit.

Wireless Temperature & Humidity Station Page | 8

Alert Setting Order:

• Outdoor HIGH Temperature ON/OFF

• Outdoor HIGH Temperature Value

• Outdoor LOW Temperature ON/OFF

• Outdoor LOW Temperature Value

• Outdoor HIGH Humidity ON/OFF

• Outdoor HIGH Humidity Value

• Outdoor LOW Humidity ON/OFF

• Outdoor LOW Humidity Value

• Indoor HIGH Temperature ON/OFF

• Indoor HIGH Temperature Value

• Indoor LOW Temperature ON/OFF

• Indoor LOW Temperature Value

• Indoor HIGH Humidity ON/OFF

• Indoor HIGH Humidity Value

• Indoor LOW Humidity ON/OFF

• Indoor LOW Humidity Value

Alert Sounds:

• When armed alert value is reached, station will beep 5 times each minute, until out of alert range.

• The ﬂashing alert icon will indicate the type of alert HI or LO.

• Press any button to stop the alert from sounding.

• The alert icon will continue ﬂashing while alert value is in alert range.

• Disarm the alert to stop the alert entirely.

• When an alert is not armed OFF will show.