FAQ

La Crosse Technology, Ltd. www.lacrossetechnology.com/support Page 8

• Indoor HIGH Temperature ON/OFF

• Indoor HIGH Temperature Value

• Indoor LOW Temperature ON/OFF

• Indoor LOW Temperature Value

• Indoor HIGH Humidity ON/OFF

• Indoor HIGH Humidity Value

• Indoor LOW Humidity ON/OFF

• Indoor LOW Humidity Value

Note: When no HI or LO Temperature Alert is set, OFF will show.

Set Alerts:

1. Hold, then release the ALERTS button to enter alert set mode.

2. Press and release the +/- buttons to arm (ON) the alert if you wish to set it (leave alert

OFF to skip and move to next alert).

3. When the alert is armed (ON) press and release the ALERTS button to move to the alert

value.

4. Press and release the +/- buttons to adjust alert values.

5. Press and release the ALERTS button to confirm & move to the next alert.

6. Press the BACKLIGHT button at any time to exit settings.

Weather Station

12-Hour or 24-Hour time format

 Time can display in 12-hour (am, pm) or 24-hour format.

 Default is 12-hour time.

 Use the Program Menu

to switch time formats.

Fahrenheit/Celsius

 Use the program menu to switch between Fahrenheit and Celsius.

Backlight

 When operating with the power cable, the backlight is adjustable: HI-LOW-OFF.

 Press and release the BACKLIGHT button to adjust backlight.

 When operating on batteries only, the backlight will come on briefly when the

BACKLIGHT button is pressed.

Battery power: When operating on battery power only, press and release the any button

and the backlight will show for 10 seconds.

Try this exercise in a dim room. The weather station has a bright, dim and OFF setting for

the backlight. Wait 15 seconds after pressing the BACKLIGHT button to see if backlight

stays on. This will assure it is not in OFF SET.

1. Check that the AC cord is inserted correctly to the weather station and the outlet.

Remove the batteries.

Press the BACKLIGHT button. If the backlight comes on and the display is active your

AC cord works.

Wait 15 seconds to see if the back light stays on.

If the backlight goes out after 15 seconds, repeat #3.

Dashes, HH.H, LL.L or stuck Indoor Temperature/Humidity

Explanation: These symbols are error messages indication the indoor sensor is outside of

its readable range. For indoor readings, this is generally a power related issue.

 Check that the AC power cord is inserted into a working outlet.