FAQ

La Crosse Technology, Ltd. www.lacrossetechnology.com/support Page 10
Activate/Deactivate time alarm
 The alarm is active when set.
 Press and release the
ALARM
button to view alarm time. Then press and release the
ALARM
button to
deactivate or activate the alarm.
 The alarm icon (bell) will show when active.
Snooze Alarm
 When the alarm sounds, press the
SNOOZE
button to silence the alarm for 10 minutes.
 The snooze icon
Zz
will flash.
 Press any button except
SNOOZE
to silence the alarm for 24 hours.
No WWVB Tower Icon
 The forecast station has not received a WWVB time signal in the past 24-hours.
 Position the forecast station for better reception.
 Be sure you have good batteries in the forecast station.
 Hold the SET button to send the forecast station on a signal search at night.
 Allow up to 5 nights to receive the time signal.
Time is inaccurate
 Check to see if the WWVB Tower icon appears on the forecast station. If not, the forecast station has
not received a WWVB time signal in the past 24-hours.
 Reposition the forecast station with the front or back facing Colorado.
 Check that the Time Zone selected correctly reflects your location. Adjust the time zone in the Program
Menu.
 Check that the DST indicator is correct for your location (most areas observe DST so this should be ON).
Adjust the DST indicator in the Program Menu.
Manually Set Time/Date: Program Menu
• Hold, then release the
SET
button to enter time set SET.
• Press and release the
+
or
-
buttons to adjust the values. Hold to adjust quickly.
• Press and release the
SET
button to confirm and move to the next item.
• Press and release the
BACKLIGHT
button any time to exit settings.
Settings order:
• Language
• Beep ON/OFF
• Atomic ON/OFF
• Time Zone
• DST ON/OFF
• 12H/24H
• Hour
• Minutes
• Year
• 10.Month
• 11.Date
Note: When Español is selected,
instructions will be in Spanish.