User Manual

Sensor Preparation
• Optional probe
(not included)
socket
• Insert 2 AAA
batteries, see
polarity inside
case
Download La Crosse Mobile App
• iOS App Store, search La Crosse Alerts Mobile
• Android Play Store, search La Crosse Alerts Mobile
Follow directions on the mobile device screen to register;
for
assistance, review help within the application.
Factory Reset
(try before support request on unregistered pieces)
Gateway – remove a/c, hold gray button, reinsert a/c, release
button after see: red light on – red light off – red light on; try
registration when red light shows 4 blinks
Sensor – press and hold gray button until segments fill with
18.88; try registration when counting begins
Diagnose Gateway Lights
1 blink – LAN cable missing; cable or port bad
2 blinks – no internet protocol (IP) address from router
3 blinks – no DNS resolve; aka can’t find server
4 blinks – ready to register
Both Blink – existing registration not deleted
No Lights – check a/c power or factory reset
Solid Red – registered gateway
Contact Support
Submit a request for email response at
http://www.lacrossetechnology.com/support/alerts/
Resources
• Product Info: http://www.lacrossealertsmobile.com
• Online help: http://support.lacrossealertsmobile.com
• Email Support:
h
ttp://www.lacrossetechnology.com/support/alerts/
• Phone: [phone]
N
otes (e.g. record gateway ID, user account name):
__
__________________________________________________
__
__________________________________________________
__
__________________________________________________
__
__________________________________________________
Specifications
Sensor RF Range 200 feet (60.96m) open space
Temperature -40
o
F to 140
o
F with 0.2
o
resolution
Probe (optional) -40
o
F to 140
o
F with 0.2
o
resolution
Water H20 or Dry
Size 5.23” H x 0.76” W x 1.44” D
Care and Maintenance
• Do not mix old and new batteries
• Do not mix Alkaline, Standard, Lithium or Rechargeable
Batteries
• Always purchase the correct size and grade of battery most suitable
for intended use.
• Replace all batteries of a set at the same time.
• Clean the battery contacts and also those of the device prior to
battery installation.
• Ensure the batteries are installed with correct polarity (+and -).
• Remove batteries from equipment which is not to be used for an
extended period of time.
• Remove expired batteries promptly.
TX60U-IT http://www.support.lacrossealertsmobile.com TX60U-IT http://www.support.lacrossealertsmobile.com