Installation Guide

ManualsBrandsLa Crosse Technology ManualsClocksLED Countdown/Up Digital timer with 12 ft. power cord

Page 3

Page 4

Page 2

TWO DIGIT

COMMERCIAL TIMER

MODEL: 9191614

DC: 060319

SIMPLE 30 MINUTE TIMER UNLOCK OTHER OPTIONS

Find more product information and support here: bit.ly/laxtech_support

1. Insert the power cord into an outlet, then into your Commercial

Timer.

2. Your timer will start counting down from 30 minutes. When timer

is less that 1 minute, the countdown changes to seconds.

3. Press the RESET button to start a new 30 minute timer.

• Your timer comes with the stand attached for placement on a

counter or other ﬂat surface.

• Unscrew the stand to hang the timer on a wall.

POSITION TIMER

Commercial Timer

919-1614

Wall Mount

Stand

• To access additional features, hold the CONTROL LOCK button

until both the UP and DOWN arrows ﬂash on screen.

• This will unlock or re-lock the top button functions.

RESET

ON FRONT

Press to reset and start last timer.

PLAY/PAUSE Press to Start or Pause any timer.

COUNT

DOWN

Press to change to Countdown Timer.

Hold to set timer.

Press to increase volume during alarm (L1 to L10).

Press to adjust values.

Hold to LOCK or to UNLOCK button functions.

Press to decrease volume during alarm (L1 to L10).

Press to adjust values.

COUNT UP

Press to change to Count Up Timer.

Hold to set timer.

PRESET

Press to select a Preset Timer.

To start counting press COUNT DOWN or COUNT UP buttons.

BUTTON FUNCTIONS

RESET

ALARM

The Alarm will sound for 15 minutes unless the RESET button is

pressed.

Countdown Timer: “00” will flash while alarm sounds.

Count Up Timer: Count Up Time (“45”, “90”, etc.) will flash while

alarm sounds.

ALARM VOLUME

When the alarm sounds press the + VOLUME or - VOLUME

button to change the alarm volume. Level 1-10 will show briefly.

PRESET TIMER

There are 8 Preset Timers to choose from: 5, 10, 15, 30, 45, 60, 75,

and 90 minutes. The default is 30 minutes.

Select Preset Timer:

1. When timer is paused, press the PRESET button to select timer.

2. Choose either the COUNT UP or COUNT DOWN button to

achieve the following:

COUNT UP: The timer will count up from “00” until it reaches the

preset time. The UP arrow will ﬂash when active.

COUNT DOWN: The timer will count down to “00” from the preset

time. The DOWN arrow will ﬂash when active.

....................................

Summary of content (2 pages)

PAGE 1
SIM PLE 3 0 MINUT E T IME R TWO DI G I T CO M M E R C I A L T I MER UN LO C K OT HE R O PT I O N S 1. Insert the power cord into an outlet, then into your Commercial Timer. • To access additional features, hold the CONTROL LOCK button until both the UP and DOWN arrows flash on screen. 2. Your timer will start counting down from 30 minutes. When timer is less that 1 minute, the countdown changes to seconds. • This will unlock or re-lock the top button functions. 3.
PAGE 2
CU STOM C O U N T DOWN TIMER CUSTOM COUNT UP T IME R PL AY O R PAUSE AN Y T I M E R WARRANTY INFO 1. Hold the COUNT DOWN button until the numbers begin to flash. 1. Hold the COUNT UP button until the numbers begin to flash. 2. Use the + or - button to adjust custom time accordingly. 2. Use the + or - button to adjust custom time accordingly. 3. Press the COUNT DOWN button confirm and exit. Your Countdown Timer will start automatically. 3. Press the COUNT UP button confirm and exit.