User Manual

Page 3Page 2
0.9INCH GREEN LED
ALARM CLOCK
POWER UP
1. Insert the 120 volt power cord into an outlet.
Optional: Insert 1 “AA” battery (not included) for backup.
2. The Time Display will flash 12:00, an indication to set the time.
TIME SETTING
Continuously hold down the TIME button while setting your
hour and minutes.
1. While holding the TIME button, press the HOUR button to
set your hour. Note: The PM Indicator will appear when you
advance to PM time.
2. While holding the TIME button, press the MINUTE button to set
your minutes.
3. When the correct time is shown on the display, release the
TIME button.
ALARM TIME SETTING & OPERATION
Continuously hold down the ALARM button while setting your
alarm hour and minutes.
1. While holding the ALARM button, press the HOUR button to set
your alarm hour. Note: The PM Indicator will appear when you
advance to PM time.
2. While holding the ALARM button, press the MINUTE button to
set your alarm minutes.
3. When the correct alarm time is shown on the display, release
the ALARM button.
4. Move the Alarm ON/OFF Switch to the ON position to turn the
alarm on. Note: The Alarm Indicator will appear when the alarm
is on.
5. To turn o a sounding alarm, move the Alarm ON/OFF Switch to
the OFF position.
SNOOZE
When the alarm sounds, press the SNOOZE button to silence the
alarm for 8 minutes. The Alarm Indicator will flash while snoozing.
The snooze function can be repeated as desired.
BATTERY BACKUP
• Insert 1 “AA” battery (not included) into the Battery Compartment
on the bottom of the clock. This will keep your time and alarm
settings saved until power is restored.
• The LED display will not light-up and the alarm will not sound.
Note: If there is no battery installed and the power is interrupted,
the display will flash 12:00 and the time and the alarm will need
to be reset.
JOIN THE CONVERSATION
Ask questions, watch detailed setup videos, and provide feedback
on our La Crosse Technology social media outlets!
MODEL: 75902
DC: 100722
PM Indicator
Time Display
Alarm
ON/OFF
Switch
Alarm
Alarm Indicator
Hour
Minute Time
PM
POWER REQUIREMENTS & DIMENSIONS
Power: 120V Power Cord
Battery Backup: 1 “AA” battery (not included)
Dimensions: 5.47” L x 3.47” W x 2.13” H
(13.9 cm L x 8.8 cm W x 5.4 cm H)