Installation Guide
Note: As time passes without rain, the 1 hour, 24 hour, and 7 day rain
totals will count down to zero.
TOTAL:
• Total rainfall since station was powered on
or reset.
Reset Current Rain Readings
• Hold the RESET button for 5 seconds to reset all current rainfall
readings at the same time.
• All current rainfall reading s will be set to 0.00.
• This is useful if you accidentally added a rain reading when
positioning the sensor.
24-Hour Rainfall Alert
1. Hold the ALERT/RAIN button 3 seconds to set 24 hr rain alerts
2. The RAIN ALERT and ON/OFF will appear. Press and release the +
or - button to turn ON/OFF.
3. Press the ALERT/RAIN button to conrm and select the rain alert
value.
4. The rain alert value and SET VALUE will show. Press and release the
+ or - button to adjust the alert value.
5. Press the ALERT/RAIN button to conrm and exit.
724-2310 www.lacrossetechnology.com/support/ Page | 8