FAQ

La Crosse Technology, Ltd. Page 9
 Batteries that have fallen on a hard surface may be damaged and unable to
function properly.
 Complete a Restart
with fresh batteries.
 Use Batteries dated at least six years in advance of the current year. Batteries
dated earlier than six years from now may still work, but may be unstable in
performance.
Outdoor Sensor Drains Batteries Quickly
 Test a new set of alkaline batteries. Write down the date of installation and the
voltage of the batteries.
 When the batteries fail, please note the date and voltage again. This is helpful in
determining the problem.
 Check the distance
and resistance between the sensor and rain station. Sensors
at the end of the range may work while batteries are fresh but not after they
drain a bit.
 Check for leaking batteries, which may damage the sensor.
 Battery life is over 24 months when using reputable battery brands for both
Alkaline and Lithium batteries.
Outdoor Temperature Is Stuck or OFL
 Check Batteries.
Overpowered or underpowered batteries can cause this
reading.
 Replace outdoor sensor.
Fahrenheit/Celsius
 Enter the program menu
to switch from Fahrenheit to Celsius.
Mounting/Positioning Outdoor Sensors
Rain:
 Mount in an open area for a more accurate rain count.
 Install the Rain sensor on a level platform that is stationary.
 Insert two mounting screws (not included) through the holes in the base of the
rain sensor. Do not over tighten.
 Ideally, the Rain sensor should be mounted at least 6 ft in the air and have a
direct line of sight to the display.
 The rain sensor should be accessible to allow for periodic cleaning of debris or
insects.
 Avoid other wireless rain sensors as this can cause inaccuracy.
 The maximum wireless transmission range to the rain station is over 300 feet
(91 meters) in open air, not including walls or floors.
Temperature:
 Mount outdoor temperature sensors vertically and under a bit of an overhang.
 Protect the outdoor sensor from standing rain or snow, and from the overhead
sun, which can cause it to read incorrectly. Generally, mounting under an eave
or deck rail works well.