FAQ

La Crosse Technology, Ltd. Page 13
 While viewing Alarm Time, press the SNOOZE button to disarm the time alarm.
 The bell icon will disappear.
Snooze Alarm
 When the alarm sounds, press the SNOOZE button to silence the alarm for 10
minutes.
 The snooze function may be repeated.
 Hold the SNOOZE to exit snooze mode.
 Press any other button to stop the alarm for one day.
Rain station has Missing Segments
 This is generally a power related issue.
 Batteries
may be overpowered or underpowered. Remove batteries from Rain
station.
 Press any button 20 times. Leave the Rain station unpowered for 1-2 hours.
 Install fresh alkaline batteries with correct polarity.
Rain station is Dim
 Most rain stations have a gray background. Place the rain station at eye level. Is
it still dim?
 Rain stations that sit in the sunlight can develop a cloudy film over time.
 This is generally a power related issue.
 Batteries
may be overpowered or underpowered. Remove batteries from rain
station.
 Press any button 20 times. Leave the rain station unpowered for 1-2 hours.
 Install fresh alkaline batteries with correct polarity.
Rain station has Distorted Display
 On a brand new rain station, check for thin plastic films of printed scratch guard
that may be on the screen. This thin piece of plastic has printed numbers for
store displays.
 With all power removed the rain station should be blank.
 If numbers still appear, please check for scratch guard.
 Check that the batteries polarity is correct.
 This is generally a power related issue.
 Batteries
may be overpowered or underpowered. Remove batteries from Rain
station.
 Press any button 20 times. Leave the batteries out of the display for 2 hours.
Rain station Display is Frozen
 On a brand new rain station, check for thin plastic films of printed scratch guard
that may be on the screen. This thin piece of plastic has printed numbers for
store displays. This can make the rain station display appear “frozen”.
 With all power removed the rain station should be blank.
 If numbers still appear, please check for scratch guard.
 Check that the batteries are installed correctly.