WIRELESS CHARGING ALARM CLOCK SET UP GUIDE MODEL NUMBER: 617-148TXT
BASICS Table of Contents 07 Glow Light Selection 09 Activate/Deactivate 07 Glow Light Brightness 09 Snooze Duration 08 02 Setting the Alarm Buttons 03 LCD Display 04 LCD Display Brightness 04 Auto-Dim 05 Display Modes 05 Display Mode Options 06 Initial Setup GLOW LIGHT 1. Insert 2 AA batteries into your Outdoor Sensor. 2. Insert the 5V Power Adapter into an outlet, and then into the Power Jack on the bottom of the alarm clock. 3.
BASICS BASICS Buttons LCD Display 5 AM/PM Indicator 2 1 Snooze Indicator Weekday and Calendar 3 Auto Dim Indicator Temperature Alarm Indicator and Time 4 Time Back View 1. GLOW Press to change the Glow Light color. Hold to turn Glow Light off. 4. PLUS/MINUS (+/-) Press to increase/decrease Glow Light Brightness. Press to increase/decrease values in Settings Menu, hold to change values quickly. 2. SET Press to change Display Modes. Hold to enter Settings Menu. 5.
BASICS BASICS Auto-Dim Display Modes Auto-Dim Settings Program your LCD display to automatically dim during preselected hour. Selecting the Display Mode 1. Hold the SNOOZE/LIGHT button to enter the Auto-Dim Settings Menu. Press the SET button on the back of the clock to select a display mode. Clock will stay on selection. 2. Press the +/- buttons to turn the Auto-Dim feature on or off. Press SNOOZE/LIGHT to confirm. Display Mode Options Time and Indoor Temperature. 3.
ALARM ALARM Time Alarm Setting the Alarm Time Alarm Set a Daily, Weekday, or Weekend only Alarm. Ascending Alarm The alarm will increase in beep frequency over a 2-minute period. After the 2-minute time frame, the alarm will stop if not snoozed or turned off. 1. Hold the button on the back of the clock to enter the Alarm Settings Menu. 2. Use the +/- buttons to select Daily Alarm, Weekday M/F Alarm, or SAT/SUN Alarm. Press to confirm. 3. Use the +/- buttons to set your desired time. Press to confirm.
Glow Light CHARGING Glow Light Selection 5W Wireless Charger Select Glow Light Color: Charging your Phone 1. Press the GLOW button to turn on the Glow Light and toggle through the different light options. • Place your phone on the platform. Your phone should sit flush and centered on the charging pad.
CHARGING CHARGING Wireless Charging FAQs Q. Why is the blue light blinking? USB Charging Port There is a 1 Amp USB Charging Port located on the right side of your alarm clock. • Connect your external device’s USB charging cable (not included) into the USB Charging Port. • Charging times may vary. • USB Power Output: 1 Amp maximum current Blue Charging Indicator Light A. Phone is not centered on the charging pad. A. Your phone must be Qi-Enabled to charge. 1 Amp USB Charging Port Right View A.
OUTDOOR SENSOR APPENDIX Optional Sensor Shield Specifications • The optional Sensor Weather Shield is designed to protect your outdoor sensor from rain and snow. • This shield will offer limited protection from the sun’s heat. • Optional purchase at: bit.ly/925-1418 Alarm Clock (617-148TXT) Power Requirements: 5.
APPENDIX Scan for Manual/FAQs For detailed product videos, manuals, and more, visit our website: bit.ly/617-148txt_support Make sure to have your model number handy (617-148TXT). La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product, relating to manufacturing defects in materials and workmanship. For Full Warranty Details, Visit: www.lacrossetechnology.com/pages/warranty La Crosse Technology, Ltd • 2830 S.
APPENDIX Care & Maintenance When batteries of different brand or type are used together, or new and old batteries are used together, some batteries may be over-discharged due to a difference of voltage or capacity. This can result in venting, leakage, and rupture and may cause personal injury. • Always purchase the correct size and grade of battery most suitable for the intended use.
