WIRELESS CHARGING ALARM CLOCK SET UP GUIDE MODEL NUMBER: 617-148
BASICS Table of Contents BASICS Initial Setup ALARM Power Up GLOW LIGHT 07 Glow Light Selection 09 Activate/Deactivate 07 Glow Light Brightness 09 Snooze Duration 08 Insert the 5V Power Adapter into an outlet, and then plug it into the Power Jack on the bottom of the alarm clock.
BASICS BASICS Buttons LCD Display 5 Snooze Indicator 2 1 Weekday 3 AM/PM Indicator 4 Calendar or Temperature Time Back View 1. GLOW Press to change the Glow Light color. Hold to turn Glow Light off. 4. PLUS/MINUS (+/-) Press to increase/decrease Glow Light Brightness. Press to increase/decrease values in Settings Menu, hold to change values quickly. Top View 2. SET Press to change Display Modes. Hold to enter Settings Menu. 5.
BASICS BASICS LCD Display Brightness Display Modes Adjusting the LCD Display Brightness Selecting the Display Mode Press the SNOOZE/BACKLIGHT button on the top of the clock to adjust the backlight intensity. There are 4 brightness levels, plus an off option. Press the SET button on the back of the clock to select a display mode. Clock will stay on selection. Auto-Dim Settings Program your LCD display to automatically dim during preselected times. Display Mode Options Full Weekday 1.
ALARM ALARM Time Alarm Time Alarm Setting the Alarm Ascending Alarm The alarm will increase in beep frequency over a 2-minute period. After the 2-minute time frame, the alarm will stop if not snoozed or turned off. 1. Hold the button on the back of the clock to enter the Alarm Settings Menu. 2. Use the +/- buttons to set your desired time. Press to confirm. 3. Next, use the +/- buttons to set your desired snooze duration (5 to 120 minutes). Press to confirm and exit the Alarm Settings Menu. 4.
Glow Light CHARGING Glow Light Selection 5W Wireless Charger Select Glow Light Color: 1. Charging your Phone Press the GLOW button to turn on the Glow Light and toggle through the different light options. • Place your phone on the platform. Your phone should sit flush and centered on the charging pad. Glow Light Color Selection Order: Cycle | Red | Yellow | Green | Cyan | Dark Blue | Purple | White Press the SNOOZE/LIGHT to select an individual solid color.
CHARGING CHARGING Wireless Charging FAQs Q. Why is the blue light blinking? USB Charging Port There is a 1 Amp USB Charging Port located on the right side of your alarm clock. Blue LED Light • Connect your external device’s USB charging cable (not included) into the USB Charging Port. A. Phone is not centered on the charging pad. A. Your phone must be Qi Enabled to charge. • Charging times may vary. 1 Amp USB Charging Port Right View • USB Power Output: 1 Amp maximum current A.
APPENDIX Specifications Warranty Power Requirements: 5.0V Power Cord (Included) HX13-0502500-AU-001 The plug on the power adapter is intended to serve as the disconnect device, the socket-outlet shall be installed near the equipment and shall be easily accessible. La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product, relating to manufacturing defects in materials and workmanship.
APPENDIX FCC Statement 1.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
