FAQ

La Crosse Technology, Ltd Page 2
• The Projection will operate at three levels of intensity (including OFF) at your discretion
when using the power cable.
• Settings Backup: Your alarm clock has a capacitor that will keep settings for 6 minutes
in the event it loses power. Time will not display when unplugged.
Alarm Clock Factory Restart
Explanation: The factory restart returns the alarm clock to an “out-of-the-box” state and
often resolves an issue.
Factory Restart: Press the RESET button on the back of the clock one time.
12/24-Hour Time Format
• Use the Settings Menu to select 12 hour or 24 hour time format.
Does the clock have a backlight?
Yes, this alarm clock has a backlight.
• Press the SNOOZE/BACKLIGHT button to adjust the backlight 5 levels of intensity.
• Intensity Levels: 0FF | 1.5% | 20% | 50% | 100%.
LCD Backlight is not on:
Try this exercise in a dim room. The backlight will operate at five levels of intensity
(including OFF) at your discretion when using the power cable. Press the
SNOOZE/BACKLIGHT button a few times. Wait 15 seconds to see if backlight stays on.
This will assure it is not in OFF mode.
What is Auto Dim backlight?
AUTO DIM allows you to set a time for your backlight to automatically dim to level 1, and
then return to level 5 at a preset time. This is a handy feature to dim the backlight at the
same time every night for sleep.
Set Auto Dim (Hour only).
1. Hold the SNOOZE/LIGHT button 2 seconds to enter dimmer set mode. AUTO DIM OFF
will show.
2. Press the + or – buttons to turn dimmer (ON). AUTO DIM ON will show.
3. Press the SNOOZE/LIGHT button to select start time (Hour) for dimmer. START and the
hour will flash.
4. Press the + or – buttons to change the hour for the dimmer to be low light level.
5. Press the SNOOZE/LIGHT button to select start time for dimmer to be on High light level.
STOP and the hour will flash.
6. Press the + or – buttons to change the hour for the dimmer to be high light level.
7. Press the SNOOZE/LIGHT button to confirm exit.