Installation Guide

ManualsBrandsLa Crosse Technology ManualsClocksLED 3-Sided Alarm Clock with Blue Base

Page 3

Page 4

Page 2

THREE SIDED ALARM

INSTRUCTION GUIDE

MODEL: 617106 / 617106B

DC: 050420

POWER UP

1. Insert power adapter into a wall outlet, then into your clock.

Optional: Insert a 9 volt battery (sold separately) for backup.

2. Adjust time and date settings on the clock.

SETTINGS

1. Hold the SET button to enter the Settings Menu.

2. Press the + or - button to adjust the flashing values. Hold to

adjust quickly.

3. Press the SET button to confirm adjustments and move to the

next item.

4. Press the SNOOZE/LIGHT button at any time to exit.

Settings Menu Order:

• 12/24 Hour

• Hour

• Minutes

• Year

• Month

• Date

• Temperature Fahrenheit/Celsius

For more product information visit: bit.ly/laxtech_support

DUAL ALARM SETTINGS

These are crescendo alarms, which will increase in frequency and

volume for up to 5 minutes if no button is pressed.

• Press SNOOZE/LIGHT to snooze a sounding alarm

• Press to deactivate alarm 1.

• Press to deactivate alarm 2

ADJUSTABLE BACKLIGHT

Press the SNOOZE/LIGHT button to adjust the brightness of your

clock’s LCD.

• 100% Brightness (default)

• 50% Brightness

• 12% Brightness

• 0% OFF

USB CHARGING PORT

Connect your external device’s USB charging cable (not included)

to the USB Charging Port.

• This is a power output charging port. It does not provide power

to the alarm clock.

• Charging times will vary.

• USB Power Output: 1 Amp maximum current.

• Charge 1 Amp devices or devices that are self-regulating.

Optional:

Battery for backup

operation only

Battery for backup

operation only

Set Alarm 1:

1. Hold the button to enter the Alarm 1 Settings.

2. Press the + or - button to adjust the flashing values. Hold to

adjust quickly.

3. Press the button to confirm and move to the next item.

4. Press the SNOOZE/LIGHT button at any time to exit.

Set Alarm 2:

Repeat steps 1-4 above with the button.

Activate/Deactivate Alarm 1 or Alarm 2:

When alarm 1 or alarm 2 are set they are active.

• Press to deactivate or activate alarm 1.

• Press to deactivate or activate alarm 2.

• The associated bell icon will show on the screen when an

alarm is active.

Snooze:

• When the alarm sounds, press the SNOOZE/LIGHT button to

slience the alarm for 10 minutes.

• The alarm bell icon will ﬂash.

• Press any button except SNOOZE/LIGHT to silence the alarm for

24 hours.

Summary of content (2 pages)

PAGE 1
T H REE S I DE D A L A R M I N STR U C T ION G UID E POWE R UP D UAL AL AR M SE T T I N GS 1. Insert power adapter into a wall outlet, then into your clock. Optional: Insert a 9 volt battery (sold separately) for backup. 2. Adjust time and date settings on the clock. Set Alarm 1: 2. Press the + or - button to adjust the flashing values. Hold to 3. Press the Battery for backup operation only button to confirm and move to the next item. 4. Press the SNOOZE/LIGHT button at any time to exit.
PAGE 2
BAT T E RY BACKUP TH R EE C U STO M DIS P LAYS Your clock has three unique displays to provide the Time, Date, Temperature and Alarm, information you need. Main Front Display: Press the SET button to change the display. • Press 1: Time Mode (Default) • The LED display will not light-up but alarms will sound at their preset alarm time. • Press 2: Temp/Humidity Mode P • Press 3: Date Mode • Press 4: Alarm 1 Set Time • Press 5: Alarm 2 Set Time Left Side Display: Press the button to change the display.