Atomic Projection Clock with Indoor/Outdoor Temperature SET UP GUIDE MODEL: 616-1410 / 616-12667
Power Up 1. Insert 2-AA batteries into your Outdoor Sensor. 2. Insert the 5 volt power cord into an outlet, then into your Projection Clock. Optional: Insert 3-AAA batteries for backup. 3. Set time, date, etc. 4. Once the sensor is reading to your clock, place the senor outside in a shaded location. View our sensor mounting video here: bit.
Settings Menu 1. Hold the SET button to enter the Settings Menu. 2. Use the +/- buttons to adjust values. 3. Press SET to confirm values. 4. Press the SNOOZE/LIGHT button at any time to save and exit.
Backlight • Press the SNOOZE/LIGHT button to adjust the backlight to adjust the backlight intensity. There are 4 levels, plus an off option. Auto Dim Program your display to automatically dim during preselected times. 1. Hold the SNOOZE/LIGHT button to enter the Auto-Dim Settings Menu. 2. Press the +/- buttons to turn the Auto-Dim feature on or off. Press SNOOZE/LIGHT to confirm. 3. Press the +/- buttons to adjust the starting hour. Press SNOOZE/LIGHT to confirm. 4.
Custom Display Press the CALENDAR button to change the middle section of your display. Choose between full weekday, abbreviated weekday with date, or alarm time. Projection Image 1. Hold the button to enter the Projection Settings 2. Use the +/- buttons to change projection selection. 3. Projection image will stay on last option selected.
Projection Brightness & Rotation Brightness: Press the button to change the Projection Brightness (High, Low, or Off). Rotation: Use the Rotation Wheel on the back of the projection arm to change the projection orientation 270 degrees. Tilt The Projection Arm: The Projection Arm can tilt forward and backward to adjust the location of the projection image on a wall or ceiling. Time Alarm Set Alarm: 1. Hold the ALARM button to enter the Alarm Settings Menu. 2.
Snooze: • When alarm sounds, press the SNOOZE button to silence alarm for 10 minutes. The Snooze Icon Zz will flash. • Press any button except SNOOZE to silence the alarm for 24 hours. • When alarm ends by button press or time out after 2 minutes, GOOD DAY will show briefly then return to normal time display. Temperature Trend Arrows Both the Indoor and Outdoor temperature have Trend Arrows to indicate temperature changes (2°F / 1°C) over the past one hour period.
Outdoor Temperature If you are seeing NO or dashes for your outdoor readings, please try the following steps: 1. Hold the + button to search for your outdoor sensor. The Reception Indicator will begin to animate. 2. If after 3 minutes the sensor still isn’t connected, bring the sensor inside next to the display and remove power from both the sensor and clock. 3. Press any button on the clock 20 times and leave the parts sit for a few moments with the power off. 4.
Stay in Touch Specifications Ask questions, watch setup videos, and Projection Clock (616-1410 / 616-12667) provide feedback on our social media outlets. Temperature Range: 32°F to 99°F (0°C to 37°C) Follow La Crosse Technology on YouTube, Twitter, Facebook and Instgram. Low Battery Indicator By the Indoor Temp, replace clock batteries. By the Outdoor Temperature, replace sensor batteries. Care + Maintanence Do not mix old and new batteries.
Warranty Info La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to manufacturing defects in materials & workmanship. La Crosse Technology, Ltd, 2830 S. 26th St. La Crosse, WI 54601 For Full Warranty Details, Visit: www.lacrossetechnology.com/pages/warranty WARNING: This product can expose you to chemicals including styrene, which is known in the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.
