FAQ
Table Of Contents
- 616-1410 & 616-12667FAQS
- CONTENTS
- BATTERIES: What do I need to know about batteries?
- HARDWARE: Sensors and Clock
- What are the power requirements for this clock?
- SETUP: How do I setup my clocks?
- MOUNTING: Where do I mount/position my sensor?
- Where to I place my clock?
- TIME: Does this clock have Atomic Time?
- How do I manually set the time?
- How Many Time Zones are available?
- What are the Daylight Saving Time (DST) Settings?
- WEEKDAY: How do I correct the day of the week?
- Does this clock have 12 hour and 24 hour time options?
- Does this clock have a backlight?
- WHAT IS Auto Dim backlight?
- Where did my calendar go?
- How do I set my Time alarm?
- What are my Projection Options?
- Can I change the brightness of the projection?
- Can I change the Orientation of the Projection?
- Why doesn’t the temperature/humidity readings on my clock match the Weather report?
- What does a reading of “HI” or “LO” mean?
- What does “NO” mean?
- Why does my Temperature readings come and go?
- What is Distance | Resistance | Interference?
- Can I change batteries in my sensors without losing data?
- FACTORY RESET: How do I factory reset my clock?
6 | Page
Settings order:
• Language (English, Spanish, French, German)
• Beep ON/OFF
• Atomic ON/OFF
• DST AUTO/ DST OFF / DST ON
• Time Zone
• 12/24 Format
• Hour
• Minutes
• Year
• Month
• Date
• Month/Date or Date/Month
• Fahrenheit/Celsius
Note: If Atomic OFF is selected, skip DST and Time Zone selection and move straight to the
12/24 Hour.
Settings Menu
1. Hold the SET button for 2 seconds to enter setting mode. ENGLISH will show. Press the + or
- button to change to another language (Español, or Français or Deutsch). Press the SET
button to select Beep ON/OFF.
2. BEEP ON will show. Press the + or – button to turn beep sound OFF. Press the SET button to
move to Atomic Time ON/OFF.
3. Press SET to confirm and move to the atomic time ON/OFF. ATOMIC ON will show. ON
flashes. Use the + or - button if you do not want Atomic Time signal (OFF).
4. Press SET to confirm and move to the Daylight Saving Indicator. DST AUTO ON will show.
USE the + or - button to Select DST ON (DST all year) or DST OFF (Standard Time all year).
5. Press SET to confirm and move to the Time Zone. EASTERN will flash. Use the + or - button
to select your time zone.
6. Press SET to confirm and move to 12/24 hour time. 12/24 FORMAT will show. 12HR flashes.
Press the + or - button to turn select 24 hour time format.
7. Press SET to confirm and move to the hour. HOUR will show. The hour flashes. Press the +
or - button to choose the hour.
8. Press SET to confirm and move to the minutes. MINUTES will show. Minutes flash. Press the
+ or - button to choose the minutes.
9. Press SET to confirm and move to the year. The YEAR 2020 will show. Year will flash. Press
the + or - button to change the year.
10. Press SET to confirm and move to the month. The MONTH will show. The Month will flash.
Press the + or - button to change the month.
11. Press SET to confirm and move to the date. DATE will show. Date will flash. Press the + or -
button to change the date.