Installation Guide

Page 6Page 5Page | 4
SPECIFICATIONS
Indoor Temperature Range: 32°F to 99°F (0°C to 37°C)
Power Requirements: 2 “AA” Batteries (sold separately)
Dimensions: 11” W x 1.1” D x 8.54” H (27.9 cm x 2.8 cm x 21.7 cm)
DESIRED HOUR (TIME ADVANCE)
WARRANTY INFO
La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product
relating to manufacturing defects in materials & workmanship.
La Crosse Technology, Ltd, 2830 S. 26th St., La Crosse, WI 54601
For Full Warranty Details, Visit: www.lacrossetechnology.com/support
CARE + MAINTENANCE
•
Do not mix old and new batteries.
•
Do not mix Alkaline, Lithium, standard, or rechargeable batteries.
•
Always purchase the correct size and grade of battery most suitable for intended use.
•
Clean the battery contacts and also those of the device prior to battery installation.
•
Ensure the batteries have with correct polarity (+ / -).
•
Remove batteries from equipment that will not to be used for an extended period.
•
Promptly remove expired batteries.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
CAUTION!
Any changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed
using electronic, mechanical or chemical process without the written permission
of the publisher.
This booklet may contain errors or misprints. The information it contains is regularly checked and corrections
are included in subsequent editions. We disclaim any responsibility for any technical error or printing error, or
their consequences. All trademarks and patents are recognized.
WARNING: This product can expose you to chemicals including styrene, which is known to the State of
California to cause cancer. For more information go to: www.P65Warnings.ca.gov
Your clock allows you to set a Desired Hour to other times around the
world. You can only change the Hour.
Set Desired Hour:
1. Hold the TIME ADVANCE button until the Hour flashes, “Desired Hour”
will show.
2. Press the + (PLUS) button to adjust the hour. Press the - (MINUS) button
to reset hour to “current hour”.
3. Press the TIME ADVANCE button to confirm and exit.
Switch between Desired Time and Local time:
• Press the TIME ADVANCE button to switch between Desired Time and
Local Time.
• Desired Time is indicated with this icon.
Note: In the even of battery change or reset, these settings will need to
be readjusted.
Set Desired Hour View Desired Hour
View Local Time
If you require additional support, get in touch with our friendly customer support
team based out of La Crosse, WI.
Phone: [phone]
Online: bit.ly/contact_techsupport
Our knowledgeable customer support team is available:
Monday-Friday, 8am-6pm CST.
JOIN THE CONVERSATION
Ask questions, watch detailed setup videos, and provide feedback on our social
media outlets!
WE’RE HERE TO HELP!
TIME ALARM
Set Alarm:
1. Hold the ALARM button to enter Alarm Settings. “AL” will show. Use the
+ or - button to adjust values.
2. Press the ALARM button to confirm and move to next item.
3. Press the TIME ADVANCE button any time to exit.
TIME ALARM
Activate/Deactivate Alarm:
• The alarm is active when set.
• Press the ALARM button to deactivate or activate the alarm. The alarm
time will show for 2 seconds.
• Alarm Icon will show when active.
Note: The alarm will only sound based on the local time and not the
time advance time.
Alarm ON
Alarm OFF