User Manual

1. Hold the MODE button for 3 seconds to enter settings mode.
ENGLISH will show. Use the +/- button if you wish to select
ESPAÑOL (Spanish).
2. Press the MODE button to move to BEEP ON/OFF.
Use the +/- button to turn off the beep sound.
3. Press the MODE button to select atomic time signal ON/OFF.
Use the +/- button if you do not want atomic time reception.
5. Press the MODE button to select daylight saving time ON/OFF.
If you do not observe DST, use the +/- button to turn off the
Daylight Saving Time Indicator.
4. Press the MODE button to select your time zone.
Use the +/- button to adjust.
Note: If you choose OFF for atomic time, the clock will skip time
zone and DST setting and jump to 12/24 hour time.
AST = Atlantic
EST = Eastern
CST = Central
MST = Mountain
PST = Pacic
AKT = Alaska
HAT = Hawaii
6. Press the MODE button to select 12 hour or 24 hour time format.
Use the +/- button to adjust.
7. Press the MODE button to set the Hour.
Press the +/- button to adjust.
8. Press the MODE button to set the Minutes.
Press the +/- button to adjust. Hold to adjust quickly.
513-1419-WA www.lacrossetechnology.com/support Page | 3