Atomic Digital Office Clock MONTH DATE For online video support: http://bit.ly/LaxTechTalk Instructional Manual Model: 513-1419-WA DC:112516 Protected under U.S.
LCD Features DAY MONTH DATE MONTH DATE Atomic Time Reception Icon Snooze Icon Zz Low Battery Icon Alarm Active Icon (bell) Custom Display Modes • Press and release the MODE button to customize how the top and right sections of the clock are displayed. • The clock will stay in the mode selected.
Setup 1. Insert 2 “AA” batteries into the clock according to polarity markings. 2. Manually Set Time/Date Note: The clock will search for atomic time 2 hours after batteries are installed. AA AA Atomic Time Signal • This clock while plugged in, may take up to 3 days to get the signal. • The clock will automatically search at UTC 7:00, 8:00, 9:00, 10:00, and 11:00. • If there is no WWVB reception, the clock will search for the atomic time signal every 2 hours until the WWVB time is received.
1. Hold the MODE button for 3 seconds to enter settings mode. ENGLISH will show. Use the +/- button if you wish to select ESPAÑOL (Spanish). 2. Press the MODE button to move to BEEP ON/OFF. Use the +/- button to turn off the beep sound. 3. Press the MODE button to select atomic time signal ON/OFF. Use the +/- button if you do not want atomic time reception. Note: If you choose OFF for atomic time, the clock will skip time zone and DST setting and jump to 12/24 hour time. 4.
9. Press the MODE button to set the Year. Press the +/- button to adjust. 10.Press the MODE button to set then set the Month. Press the +/- button to adjust. Hold to adjust quickly. 11.Press the MODE button to set the Date. Press the +/- button to adjust. Hold to adjust quickly. 12.Press the MODE button to select Fahrenheit or Celsius temperature display. Press the +/- button to adjust. 13. Press the MODE button to confirm and exit. Note: Press the SNOOZE button at any time to exit settings.
Low Battery Icon • The low battery icon will appear between the hour and minutes. • This icon indicates it is time to replace the batteries. Visit Us on Social Media Latest video content http://bit.ly/LaxTech_YouTube For personalized interaction http://bit.ly/LaxTech_Facebook Join the conversation http://bit.ly/LaxTech__Twitter Pin and share http://bit.ly/LaxTech_Pinterest 513-1419-WA www.lacrossetechnology.
Care and Maintenance • Do not mix old and new batteries. • Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries • Always purchase the correct size and grade of battery suitable for intended use. • Replace all batteries of a set at the same time. • Clean the battery contacts and also those of the device prior to battery installation. • Ensure the batteries are installed with correct polarity (+ and -).
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
