ATOMIC DIGITAL WALL CLOCK Model: 513-1311OTN DC: 012918
POWER UP 1. Insert 2 new “AAA” batteries into the outdoor sensor. Observe correct polarity. The red LED will flash when transmitting. 2. Insert 3 new “C” batteries (not included) into the clock. Observe the correct polarity. 3 After 5 minutes place sensor outside in a shaded location.
12/24 HOUR & TIME ZONE SELECTION • Press the + 12/24 button to select 12 hour or 24 hour time format. Default is 12 hour time. • Hold the +12/24 button to select the time zone. • Time zones: P Pacific M Mountain C Central E E Eastern FAHRENHEIT | CELSIUS TEMPERATURE DISPLAY • Press the - °C/°F button to change the temperature display from Fahrenheit to Celsius. TIME ALARM 1. 2. 3. 4. 5. Press the MODE/SET button to view alarm time. The letters AL will replace the seconds.
DEACTIVATE/ACTIVATE ALARM • • • • Press the AL ON/OFF button to activate the alarm. The bell icon will appears when alarm is active. Press the ALARM ON/OFF button to deactivate the alarm. The bell icon will disappear. SNOOZE • • • When the alarm sounds, press the SNOOZE button to trigger snooze alarm for 5 minutes. The snooze icon Zz will flash above the time. The snooze function can be repeated up to seven times.
WAR R AN T Y IN F O La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to manufacturing defects in materials & workmanship. For Full Warranty Details, Visit: ww.lacrossetechnology.com/support CAR E + MA IN T E N A N C E • • • • • • • Do not mix old and new batteries. Do not mix Alkaline, Lithium, standard, or rechargeable batteries.
FCC STAT E M E N T This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
