Full Product Manual

ManualsBrandsLa Crosse Technology ManualsClocksExtra-Large Atomic Digital Clock with Indoor Temperature and Humidity

Page 3

Page 4

Page | 2

EXECUTIVE

ATOMIC CLOCK 1.0

MODEL: 51305867

DC: 121420

POWER UP SETTINGS

WWVB ATOMIC TIME SIGNAL

For more product information visit: bit.ly/laxtech_support

DESIRED HOUR (TIME ADJUST)

• The station will automatically search for the Atomic Time Signal

at power up and again at UTC 7:00, 8:00, 9:00, 10:00, and 11:00.

• Press and release the button to manually search for the

WWVB Atomic Time Signal.

• The Tower Icon will ﬂash while searching, and be solid on

screen when the signal is received.

• For information about WWVB Atomic Time visit:

http://bit.ly/AtomicTime

FAHRENHEIT/CELSIUS SELECTION

TIME ZONE

ATLANTIC

EASTERN

CENTRAL

MOUNTAIN

PACIFIC

ALASKA

HAWAII

1. Hold the button to enter the Settings Menu.

2. Use the + or - button to adjust values.

3. Press the

button to confirm and move to next item.

4. Press the F/C button at any time to exit.

Settings order:

• Language (English, Spanish, French, German)

• Beep ON/OFF

• Atomic ON/OFF

• DST AUTOMATIC / DST ALWAYS OFF / DST ALWAYS ON

(Change Spring/Fall) (No change in Spring) (No change in Fall)

• Time Zone

• 12/24 Format

• Hour

• Minutes

• Year

• Month

• Date

• Month/Date or Date/Month

Press the F/C button to select Fahrenheit or Celsius Temperature

display.

1. Insert 6-AA batteries into your clock.

2. Configure your Settings.

Notes:

• The language selected in this menu will adjust the Weekday

readout and menu items.

• If “Atomic OFF: is selected, menu will skip DST and Time Zone

settings and move straight to the 12/24 Hour Format setting.

• Weekday sets automatically when Year, Month and Date are set.

Have your clock match other times around the world by setting a

Desired Hour, kept accurate by the Atomic time signal. Note: only

the hour can be changed.

Set Desired Hour:

1. Hold the button until the Hour ﬂashes, “

Desired Hour

” will

show.

2. Press the + (PLUS) button to adjust the hour. Press the - (MINUS)

button to reset hour to “Local Time”.

3. Press the button to conﬁrm and exit.

Switch between Desired Time and Local time:

• Press the button to switch between Desired Time and Local

Time.

• Desired Time is indicated with the icon.

Note: In the event of battery change or reset, these settings will

need to be readjusted.

VIEW LOCAL TIMESET DESIRED HOUR VIEW DESIRED HOUR

Summary of content (2 pages)

PAGE 1
POWE R UP 1. Insert 6-AA batteries into your clock. 2. Configure your Settings. E XEC UTI VE ATO M I C C LO C K 1. 0 WWVB ATOMIC T IM E SIGN AL • The station will automatically search for the Atomic Time Signal at power up and again at UTC 7:00, 8:00, 9:00, 10:00, and 11:00. • Press and release the button to manually search for the WWVB Atomic Time Signal. • The Tower Icon will flash while searching, and be solid on screen when the signal is received.
PAGE 2
CALEN DAR D IS P L AY OP TION S BUT TON FUNCT IONS Press the button to change how the Calendar is displayed. Full Weekday, Month/Date/Year, Weekday/Month/Date. Press to search for Atomic Time Signal. Hold to enter Settings Menu. + (PLUS) Settings: Press to adjust settings. Hold to adjust quickly. Hold to search for Outdoor Sensor. - (MINUS) Settings: Press to adjust settings. Hold to adjust quickly. Press to switch between Desired Time or Local Time. Hold to adjust your Desired Time hour.