FAQ
Table Of Contents
- 513-05867 FAQS
- CONTENTS
- BATTERIES: What do I need to know about batteries?
- What are the power requirements for this clock?
- SETUP: How do I setup my clock?
- How do I manually set the time?
- Does this clock have 12 hour and 24 hour time options?
- What do the Daylight Saving Time (DST) Settings mean?
- How do I select Fahrennheit or Celsius?
- TIME: Does this clock have Atomic Time?
- What is Desired Hour (Time Adjust) and how do I set it?
- Can I change the Calender Display?
- How do I select where Time and Temperature are Display?
- Can I add sensors?
- What does a reading of “HI” or “LO” mean?
- What does “NO” mean?
- FACTORY RESET: How do I factory reset my clock?
2 | Page
SETUP: HOW DO I SETUP MY CLOCK?
1. Insert 6 “AA” batteries into your clock.
2. Enter Basic Settings.
HOW DO I MANUALLY SET THE TIME?
IMPORTANT: Only press or hold one button at a time.
1. Hold the button 2 seconds to enter settings mode.
2. Press the + or - button to adjust the flashing values.
3. Hold the + or - buttons to adjust quickly.
4. Press the button to confirm adjustments and move to the next item.
5. Press the F/C button at any time to exit.
Settings order:
• Language (English, Spanish, French, German)
• Beep ON/OFF
• Atomic ON/OFF
• DST AUTOMATIC/ DST OFF / DST ON
• Time Zone
• 12/24 Format
• Hour
• Minutes
• Year
• Month
• Date
• Month/Date or Date/Month
Notes:
• The language selected in this menu will adjust the Weekday readout and menu items.
• If “Atomic OFF: is selected, menu will skip DST and Time Zone settings and move straight to
the 12/24 Hour Format setting.
• Weekday sets automatically when Year, Month and Date are set..
Settings Menu
1. Hold the button for 2 seconds to enter setting mode. ENGLISH will show. Press the + or -
button to change to another language (Español, or Français or Deutsch). Press the button
to select Beep ON/OFF.
2. BEEP ON will show. Press the + or – button to turn beep sound OFF. Press the button to
move to Atomic Time ON/OFF.
3. Press to confirm and move to the atomic time ON/OFF. ATOMIC ON will show. ON
flashes. Use the + or - button if you do not want Atomic Time signal (OFF).