FAQ

9 | Page
HOW DO I SET ALERTS?
HI ALERT LO ALERT
Important:
• Alerts are defaulted to be OFF.
• The alerts menu is in the order listed below.
• When alert is ON, the alert value flashes to be set. No additional button press required.
• Leave an alert OFF (disarmed) press the ALERT button to skip setting that alert value.
• The HI or LO alert icon will show when the alert is active.
• When armed alert value is reached, station will beep 5 times each minute, until out of alert
range. The flashing alert icon will indicate it is a LO or HI alert.
• Press any button to stop the temp alert sound. The alert icon will flash while value is in alert
range.
Alert Setting Order:
• High Wind Speed Value 0-111.8 (0-178kmh)
• 24 Hour Rainfall
• Outdoor HI Temperature
• Outdoor LO Temperature
• Outdoor HI Humidity
• Outdoor LO Humidity
• Indoor HI Temperature
• Indoor LO Temperature
• Indoor HI Humidity
• Indoor LO Humidity
1. Hold the ALERTS button 2 seconds to enter Alert Settings. (ALERT OFF and Alert Type will
show for selected area)
2. Press and release the + or – button to turn alert ON
3. When the alert is ON, the alert value is flashing. Use the + or – buttons to set.
4. Hold the + or – buttons to scroll quickly.
5. Press and release ALERTS button to move to next item.
6. Leave an alert OFF (disarmed) and press the ALERTS button to skip setting that alert value
7. The alert icon will show when the alert is active.
8. When armed alert value is reached, station will beep 5 times each minute, until out of alert
range. (1 second beep once, sound for 5 seconds, wait 55 seconds and then repeat began
to ring for 5 seconds.)
9. The flashing Alert Icon will indicate if it is a LO or HI alert.
10. Press any button to stop the temp alert sound. The alert icon will flash while value is in alert
range.