FAQ

7 | Page
day was 1.2 inches.
• Then the 24 hour reading from noon today, back to 1:00pm the previous day shows 0.8 inches.
The 0.4 inches of rain from noon-1:00pm on the previous day has dropped off the 24 hour
total.
HOW DO I RESET RAINFALL READINGS?
• Press the RAIN button to view individual rain readings.
• Hold the MINUS button for five seconds to reset the individual value.
• Rainfall reading will reset to 0.00
HOW DO I SET THE PRESSURE?
Pressure:
• Relative Pressure reading will come from the sensor inside the station.
• Pressure can rotate with Rain readings.
Set Pressure:
1. Hold the MODE/PRESSURE button for 2 seconds. PRESSURE will show, INHG will flash.
Press the + or - button to select HPA.
2. Press the MODE/PRESSURE button to confirm and move to Pressure Value. The Pressure
Number will flash. Press the + or - button to adjust to your local reading. Hold the + or -
buttons to adjust quickly.
3. Press PRESSURE to confirm and exit.
HOW DO I VIEW PRESSURE OR 24 HOUR RAINFALL READINGS?
• Press the MODE/PRESSURE button to toggle Pressure and 24 hour rainfall or Cycle between
the two readings.
HOW DO I VIEW MY HI AND LO TEMPERATURE/HUMIDITY READINGS?
Your high and low temperature and humidity readings are recorded with time and date of
occurrence. Each time a new high or low reading is recorded, that reading with time and date of
occurrence will show.
To view your HI | LO records, simply press and release the TEMP button.
Viewing order:
• Outdoor HI Temperature
• Outdoor LO Temperature
• Outdoor HI Humidity
• Outdoor LO Humidity