FAQ

13 | Page
WHAT DO THE TREES SHOW?
The tree foliage will change twice per year. The dates are programmed into the weather station
for automatic change.
Summer: April 1 – October 31
Winter: November 1 – March 31
SUMMER WINTER
FACTORY RESET: HOW DO I FACTORY RESET MY STATION?
To factory reset your station:
1. Hold the ALERTS and RAIN buttons together for 5 seconds.
2. When your station resets it will look for all sensors. Allow at least ten minutes to reacquire
the sensors.
WHY DOESN’T THE TEMPERATURE/HUMIDITY READINGS
ON MY STATION MATCH THE WEATHER REPORT?
• Your temperature and humidity readings are from your sensor at your location. Your local
reporting station can be miles away so readings will differ.
TEMP ACCURACY: WHY DOES MY THERMO-HYGRO SENSOR READ
INACCURATELY?
• The thermo-hygro sensor reads the environment. Since your Temperature/Humidity
readings come from the Wind/TH sensor they may occasionally be inaccurate if the sunlight
hits the sensor.
• If this is a common occurrence you can purchase a TX141TH-Bv3 sensor and replace the
Temperature/Humidity Reading from the Wind/TH sensor.
HOW TO REPLACE THE TH READING FROM THE WIND TH SENSOR?
The new Wind Speed, Wind Direction Sensor with Temperature/Humidity may cause inaccurate
temperature readings in some locations. Because of this, you have the option to remove the TH