Full Product Manual

Model: 308-1425B www.lacrossetechnology.com/support pg. 9

INDOOR HIGH
alert will flash. Press the ▼ or ▲ buttons to set the alert
value, and press the ALERT button to confirm. Then press the ALERT
button again switch to INDOOR LOW setting.

INDOOR LOW
alert will flash. Press the ▼ or ▲ buttons to choose the
value, and press the ALERT button to confirm and exit.
Note:
After selecting temperature alert values use the next step to turn
individual alerts ON or OFF.
ARM/DISARM TEMPERATURE ALERTS
 In normal time mode, press and release the
ALERT
button to toggle
between:
o Outdoor HI
o Outdoor Lo
o Indoor HI
o Indoor LO
 Press the ▲ button to
arm
the selected alert.
 The alert bell appears when each alarm is activated.
 Press the ▼ button to
disarm
the selected alert.
 OFF will show in the Alerts area if no alert is active.
TEMPERATURE ALERT SOUNDS
 When temperature alert sounds, the corresponding alert bell will flash.
 The alert beeps once every minute, until the temperature is out of alert
range.
 Press any button to stop alert. The alert bell will still show.

Disarm Alert
: In normal mode, hold and release the ALERT button to
select the alert to disarm. With HI or LO alert selected, press the ▼ button
disarm alert.
SEARCH FOR OUTDOOR SENSOR
• Hold the HEAT/DEW button to search for the outdoor sensor.
• The strength signal icon will animate until the sensor signal is received
or for 3 minutes if no signal available.