FAQ
Table Of Contents
- 308-1415BWv2v2 FAQS
- Contents
- Contents
- GENERAL INFORMATION
- BATTERIES: What do I need to know about batteries?
- BATTERIES: What do the battery icons mean?
- Sensor and Station
- What are the power requirements?
- SETUP: How do I setup my station?
- .MOUNTING: Where do I position my sensor & station?
- Position Stations
- What is Distance | Resistance | Interference?
- How do I view my HI and LO Temperature Readings?
- How do I reset the Temperature Readings?
- TIME: Does my station have Atomic Time?
- How do I manually set the time?
- WEEKDAY: How do I correct the day of the week?
- Does this station have 12 hour and 24 hour time options?
- Alarm
- Set Alarm
- Activate/Deactivate Alarm
- Snooze Alarm
- TROUBLESHOOTING
- How do I change batteries in my sensors without losing data?
- FACTORY RESET: How do I factory reset my station?
- DASHES for Temperature
- Why don’t my temperature readings on my station match the weather report?
- TEMPerature ACCURACY
- What does a reading of “HI” or “LO” mean?
- Temperature INTERMITTANT: Why does my temperature reading come and go?
- Why am I going through batteries quickly?
- How do I change between Fahrenheit and Celsius?
5 | Page
6. Press SET to confirm and move to the year. The YEAR will show. 2018 will flash. Press the + or - button to
change the year.
7. Press SET to confirm and move to the month. The MONTH will show. Month number will flash. Press the + or -
button to change the month.
8. Press SET to confirm and move to the date. DATE will show. Date number will flash. Press the + or - button to
change the date.
9. Press SET to confirm and move to Month/Date or Date/Month format. M-DATE will flash. Press the + or - button
to change to DATE-M.
10. Press SET to confirm and move to the temperature unit. TEMP °F will show. F will flash. Press the + or - button
if you prefer °C (Celsius).
11. Press SET to confirm and exit.
WEEKDAY: HOW DO I CORRECT THE DAY OF THE WEEK?
• The day of the week will set when the Year, Month, and Date are set. If your day of the week is incorrect, yet
the month and date are correct, please go the program menu and check the YEAR setting.
DOES THIS STATION HAVE 12 HOUR AND 24 HOUR TIME OPTIONS?
• Yes, you can select 12 hour or 24 hour time format in the program menu of your station.
ALARM
SET ALARM
1. Hold the ALARM button 3 seconds to enter settings mode.
2. Press the + or - button to adjust the flashing values.
3. Hold the + or - buttons to adjust quickly.
4. Press the ALARM button to confirm adjustments and move to the next item or exit.
Note: Alarm is crescendo sound. When the alarm sounds, it continues for 2 minute and then shuts off completely.
ACTIVATE/DEACTIVATE ALARM
• The alarm is active when set.
• From normal time display, press and release the ALARM button to deactivate or activate the alarm. The alarm
time will show for 2 seconds.
• Alarm icon (bell) and ALARM ON will show then active
• ALARM OFF will show when inactive.
SNOOZE ALARM
• When alarm sounds, press the ALARM button to silence alarm for 10 minutes.
• The alarm icon will flash
• Press any button except ALARM to silence the alarm for 24 hours