FAQ
Table Of Contents
- 308-1415BWv2v2 FAQS
- Contents
- Contents
- GENERAL INFORMATION
- BATTERIES: What do I need to know about batteries?
- BATTERIES: What do the battery icons mean?
- Sensor and Station
- What are the power requirements?
- SETUP: How do I setup my station?
- .MOUNTING: Where do I position my sensor & station?
- Position Stations
- What is Distance | Resistance | Interference?
- How do I view my HI and LO Temperature Readings?
- How do I reset the Temperature Readings?
- TIME: Does my station have Atomic Time?
- How do I manually set the time?
- WEEKDAY: How do I correct the day of the week?
- Does this station have 12 hour and 24 hour time options?
- Alarm
- Set Alarm
- Activate/Deactivate Alarm
- Snooze Alarm
- TROUBLESHOOTING
- How do I change batteries in my sensors without losing data?
- FACTORY RESET: How do I factory reset my station?
- DASHES for Temperature
- Why don’t my temperature readings on my station match the weather report?
- TEMPerature ACCURACY
- What does a reading of “HI” or “LO” mean?
- Temperature INTERMITTANT: Why does my temperature reading come and go?
- Why am I going through batteries quickly?
- How do I change between Fahrenheit and Celsius?
4 | Page
• Indoor LO Temperature
HOW DO I RESET THE TEMPERATURE READINGS?
Your temperature readings are reset individually.
1. Press and release the PLUS (+) button to view the reading you wish to reset.
2. Hold the MINUS (-) button for 3 seconds to reset individual temperature value to current temperature, time and
date.
TIME: DOES MY STATION HAVE ATOMIC TIME?
• No. The time needs to be set manually on your station.
HOW DO I MANUALLY SET THE TIME?
1. Hold the SET button 3 seconds to enter settings mode.
2. Press the + or - button to adjust the flashing values.
3. Hold the + or - buttons to adjust quickly.
4. Press the SET button to confirm adjustments and move to the next item.
Settings order:
• Language (English, Español, Francais)
• Beep ON/OFF
• 12/24 Hour Format
• Hour
• Minutes
• Year
• Month
• Date
• Month/Date, Date/Month
• Temperature Fahrenheit/Celsius
To begin:
1. Hold the SET button for 2 seconds to enter setting mode. ENGLISH will flash.
Press the + or - button to select a different language.
2. Press SET to confirm and move to beep sound ON/OFF. BEEP ON will show. ON flashes. Press the + or - button
to turn the button beep sound off.
3. Press SET to confirm and move to 12/24 hour. The 12Hr will flash and FORMAT will show. Press the + or -
button to choose 12 hour or 24 hour time format.
4. Press SET to confirm and move to the hour. The HOUR will flash. Press the + or - button to choose the hour.
5. Press SET to confirm and move to the minutes. The MINUTES will flash. Press the + or - button to choose the
minutes.